Housecall Pro vs Nexa The Real Comparison for Millwrights
Housecall Pro
$79/mo ($948/yr)
VS
Nexa
$279 once — own forever
or 3 payments of $99
Break even: 3.5 months at Housecall Pro's current price.
Bottom Line
Housecall Pro costs millwrights $948/year at today's list price. Nexa is $279 once for invoicing, scheduling, CRM, time tracking and accounting in one suite — so it pays for itself in 3.5 months and you own it after that. What it is not: hosted-for-you software with a support desk and a roadmap you can lobby. That is the trade, and the rest of this page is the detail behind it.
The verdict for millwrights: Housecall Pro is solid software, but at $79/month it costs $2,844 over 3 years. Nexa does most of what Housecall Pro does for $279 once. For solo millwrights and small teams, Nexa is the better deal.
Choose Nexa if:
You're done paying monthly forever
You're a solo operator or small team (1-5)
You need time-tracker, Invoicing, task-manager in one purchase in one tool
You're tired of price increases
You want to own your tools like you own your equipment
Choose Housecall Pro if:
You have a large team (10+) needing enterprise features
You're deeply invested in Housecall Pro's specific workflow
You need a feature Nexa doesn't have yet
What Housecall Pro Actually Costs Millwrights
Today's list price is $79/month — $948 a year, from Housecall Pro's own pricing page. Every figure below is that price, multiplied. Nothing is projected.
Three years at today's price
Year 1$948
Year 2$948
Year 3$948
Three years of Housecall Pro$2,844
Nexa: $279 once (or 3 × $99). Over the same three years, that is $2,565 less.
If Housecall Pro raises its price, the three-year cost goes up; if it cuts it, the cost comes down. We don't guess which. Add-ons, extra seats and card-processing fees are not included, on either side.
Feature-by-Feature
Feature
Housecall Pro
Nexa
Invoicing
✓
✓
Scheduling
✓
✓
CRM
—
✓
Time Tracking
—
✓
Full Accounting
—
✓ (SIMPL)
Task Management
—
✓
Works offline
—
✓
Price
$79/mo
$279 once or 3 × $99
3-Year Total
$2,844
$279
You own it?
No — stop paying, lose access
Yes — forever
✓ and ✗ for Housecall Pro come from its own published feature list. — means the feature isn't in that list, which is not the same as Housecall Pro lacking it: check with them. Three years is at today's price.
What "$279 Once" Does And Doesn't Buy
It buys the software, not a service contract. You install Nexa and it runs on your machine. There is no seat count, and nothing stops working if you stop paying, because there is nothing to stop paying.
Housecall Pro's monthly fee is not only rent. It pays for their hosting, their support desk, and their engineers shipping changes every week. If those matter to how you work, that is a real thing you would be giving up.
Cross-device sync is the one optional extra — $4.99/month if you want your data mirrored between machines. Skip it and Nexa still works; you just sync manually.
The honest risk of buying once: you are betting on us still being here to improve it. The honest risk of renting: the price is theirs to raise, and the graveyard section below is a record of tools that did exactly that.
What Housecall Pro Does Better
Straight from Housecall Pro's own feature set. If one of these is the reason you pay them, that reason does not disappear because Nexa is cheaper.
Online booking for home services
GPS tracking
Postcard marketing campaigns
Professional invoicing
Review collection
A smaller bill up front: plans start at $79/month, against $279 paid once for Nexa.
Housecall Pro is the better call if you need online booking for home services specifically, or if your team is large enough that per-seat pricing still beats buying software outright.
Where business tools fit — for a millwright
Software doesn't do the actual work — it automates the business around it. And that part is the same for every millwright: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.
1
Find the work
Win the job
↓
A lead, a call, a referral — and a quote or estimate that turns it into a booked job.
CRM / contacts
Estimates & proposals
Booking / scheduling
then ↓
2
Manage the work
Do the job
↓
The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.
Job / project tracking
Time tracking
Expenses, materials & add-ons
then ↓
3
Bill for it
Send the bill
↓
The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.
Invoicing
Deposits & credits
then ↓
4
Get paid
Collect payment
↓
Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.
Card / online payments
Automatic reminders
You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)
Calculate Your Full Stack
Housecall Pro plus whatever else you're paying for:
Email yourself this comparison?
Switching from Housecall Pro
1
Export your data — Go to Settings → export customers, job history, and invoices as CSV files.
2
Set up Nexa — 15-minute setup. Import your customer list and service categories.
3
Parallel run — Run both for 2 weeks. Transition dispatching and booking to Nexa.
4
Cancel Housecall Pro — Cancel subscription (check for early termination fees). Download all records.
✓ 30-day money-back guarantee. Zero risk.
Sound Familiar?
He's often called in on a clock that's already ticking: a critical pump or gearbox failed and the plant line is down, so every hour costs them production. He starts by getting the failed machine out, rigging it with chain falls and slings, because a millwright is as much a rigger as a mechanic. Setting the replacement means leveling the baseplate with a precision level, grouting if needed, and then the part the trade is named for: laser-aligning the motor to the driven equipment within thousandths, correcting for soft foot and thermal growth so the coupling runs true. He heats bearings to mount them rather than hammering, checks fits with micrometers, and dials in clearances with feeler gauges. The plant's maintenance lead hovers, asking when the line can run. He documents the as-found and as-left alignment numbers because the customer pays on proof and good data prevents the argument later. A purchasing clerk questions the parts on the work order. He ends the day logging the hours and materials against the job, noting the shim pack he had to source, and confirming the alignment readings before the line restarts.
Plant shutdown windows where the line is down and every hour of the alignment and install is costing the customer production
Billing time-and-materials on emergency breakdown calls and proving the hours and parts when the plant's purchasing questions the invoice
Holding alignment and clearance tolerances measured in thousandths, where 'close enough' guarantees premature bearing failure and a callback
Sourcing the right bearing, coupling, or shim pack on short notice when a critical machine is down and the plant has none on the shelf
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
None of that is a software problem you can buy your way out of in one click — it is why the tool you pick matters more than what it costs. Housecall Pro solves some of it. So does Nexa. The difference is what you are left holding in three years.
What This Means for Millwrights
The median Millwright earns $55,000/year. At $948/year, Housecall Pro is a recurring slice of that — paid again every year, whether the year was good or not. Owning the same jobs outright is $279 once, and the slice stops.
Nexa is $279 once. Invoicing, scheduling, CRM, time tracking, accounting — all connected, built for millwrights. You own it like you own your A laser shaft-alignment system for coupling motors to pumps and gearboxes within tolerance.
Is Nexa actually right for a millwright?
An honest fit check — because the wrong tool is worse than no tool.
Right for you if
You run solo or a small crew — like the 15,000 millwrights in the US who do, and you wear every hat.
You're tired of paying every month for a monthly subscription stack and a pile of apps that don't talk to each other.
You want to invoice, schedule, and track from the field — not from a back office.
You'd rather own your software once, the way you own your A laser shaft-alignment system for coupling motors to pumps and gearboxes within tolerance.
Look elsewhere if
You run a 20+ millwright fleet that needs enterprise dispatch and multi-crew routing — Nexa is built for 1–5, and a fleet platform will serve you better.
You need full payroll for a large team or deep, SKU-level inventory — that's not what Nexa is for.
You're genuinely happy paying monthly and don't mind stitching tools together. No tool fixes a workflow you already like.
The honest fit: if you're a solo or small millwrights business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling past a handful of crews, a fleet platform may fit better — and we'd rather tell you that now than sell you the wrong thing.
Millwrights by the numbers — by place
Tax, licensing & seasonality where you operate
1-13.3%income tax
CSLB (Contractors State License Board)licensing
Year-round construction in SoCal. Fire season (June-November) drives restoration demand. Drought impacts landscaping. Earthquake retrofitting is ongoing market.
DBPR (Dept of Business and Professional Regulation)licensing
Hurricane season June-November creates massive restoration demand. Snowbird season November-March boosts service volume 30-40%. Year-round construction. Pool service is year-round industry. Pest control peaks in summer humidity.
Harsh winters in upstate, moderate in NYC. Construction limited in winter upstate. NYC market is enormous but hypercompetitive. Brownstone/pre-war building maintenance is specialized trade. NYC licensing is notoriously complex.
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
What millwrights actually deal with
Plant shutdown windows where the line is down and every hour of the alignment and install is costing the customer production
Billing time-and-materials on emergency breakdown calls and proving the hours and parts when the plant's purchasing questions the invoice
Holding alignment and clearance tolerances measured in thousandths, where 'close enough' guarantees premature bearing failure and a callback
Sourcing the right bearing, coupling, or shim pack on short notice when a critical machine is down and the plant has none on the shelf
A day in the life of a millwright
He's often called in on a clock that's already ticking: a critical pump or gearbox failed and the plant line is down, so every hour costs them production. He starts by getting the failed machine out, rigging it with chain falls and slings, because a millwright is as much a rigger as a mechanic. Setting the replacement means leveling the baseplate with a precision level, grouting if needed, and then the part the trade is named for: laser-aligning the motor to the driven equipment within thousandths, correcting for soft foot and thermal growth so the coupling runs true. He heats bearings to mount them rather than hammering, checks fits with micrometers, and dials in clearances with feeler gauges. The plant's maintenance lead hovers, asking when the line can run. He documents the as-found and as-left alignment numbers because the customer pays on proof and good data prevents the argument later. A purchasing clerk questions the parts on the work order. He ends the day logging the hours and materials against the job, noting the shim pack he had to source, and confirming the alignment readings before the line restarts.
The tools a working millwright actually owns
A laser shaft-alignment system for coupling motors to pumps and gearboxes within tolerance
Dial indicators and a precision machinist level for rim-and-face alignment and leveling baseplates
Hydraulic and induction bearing heaters plus a puller set for mounting and removing bearings
Micrometers, feeler gauges, and a bore gauge for fits and clearances
Rigging gear: chain falls, come-alongs, slings, and shackles for setting heavy machinery
Precision shims, grout, and anchor-bolt tooling for setting equipment on a foundation
Local millwrights on Nexa
Real millwrights near you who run their business on Nexa — book directly, no platform fee.
Are you a millwright? Post your business and get found in your area — $2.99 one-time.
Or browse every millwright on Nexa →
The kit a working millwright owns
The tools of the trade — each a one-time buy that earns its keep for years.
Core kitEssential
Laser shaft-alignment system
$8,000–$30,000
Core kitEssential
Dial indicators and magnetic bases
$80–$400
Core kitEssential
Precision machinist level
$150–$700
Core kitEssential
Induction bearing heater
$1,500–$8,000
Core kitEssential
Hydraulic puller set
$300–$1,800
Core kitEssential
Micrometers, feeler and bore gauges
$150–$900
Core kitEssential
Rigging: chain falls, come-alongs, slings
$400–$2,500
Core kitEssential
Precision shim stock and anchor tooling
$100–$500
Upgrade
Vibration analyzer
$3,000–$15,000
The core kit, bought once$10,680–$44,800
Here's the bar that matters: you spent $10,680–$44,800 on tools that last for years, and never thought twice. So why should the software cost more than your whole kit — every single year? Hold it to the same standard as a good tool: $279, once.
What Nexa does for a millwright — and what it doesn't
The honest version. Nexa was built to beat the rented stack on the jobs that matter most to a millwright — here's where it wins, where the integration wins it anyway, and the things it genuinely doesn't do, with who to use instead. (No tool is best at everything; a guide that pretends otherwise is just an ad.)
Compare the essential business tools for millwrights
The usual subscriptions vs. Nexa, side by side. Drag the time slider — every year you keep renting, the gap widens. Nexa is $279, one time.
The reason it wins the set: The line-down call, the rigging and install, the thousandths alignment readings, the time-and-materials invoice with proven hours and parts, the payment, and your books are one record from seized machine to running line. in one record — $279 once vs 3 subscriptions · ~$1,044/yr.
What Nexa takes off your plate
Job & project trackingvs Jobber →On an emergency where a seized gearbox stopped the line, you log the rigging, the install, and your alignment readings held to thousandths on the job, so the proof the bearing was set right rides with the record instead of a notebook the callback could not check.
Invoicingvs FreshBooks →Time-and-materials on a breakdown call bills off the job that already captured your hours and parts, so when plant purchasing questions the invoice the alignment data and labor are right there rather than reconstructed.
Books & accountingvs QuickBooks →The plant's payment posts back to the breakdown job, so your books reflect each emergency call and its parts against the shutdown window it covered, with no separate entry from the invoice.
When you run big email campaigns & automations→ ConvertKit →
Prefer to own a piece outright instead of renting? Free and open-source tools (GnuCash, Invoice Ninja and the like) each handle one job if you'll self-host them — a real option, listed because it's true.
These are affiliate links — if you sign up through one, we may earn a commission at no extra cost to you. We list them because they're the honest best pick for the job, Nexa included. As an Amazon Associate we earn from qualifying purchases. Competitor pricing verified 2026-06-12.
How To Read This Page
We make Nexa. It is one of the two options compared here, so read this with that in mind. We have tried to make Housecall Pro's case the way we would want ours made — their strengths above are their own published feature list, not our summary of it.
The prices are Housecall Pro's published list prices, checked on the date shown in the sources below. Plans change; check theirs before you decide.
No customer quotes appear on this page because we do not have any from millwrights we can verify. For user testimony, read the independent reviews — Housecall Pro on G2 and on Capterra — where the reviewers are not selling you anything.
Some links on this page earn us money. Tool links may be affiliate links paying us a commission at no extra cost to you, including links to Housecall Pro itself. We list a tool when it is the honest pick for the job, not because of the payout.
Check the price yourself:Housecall Pro's own pricing page is the source for every figure above, read on the date shown in the sources section below.
We are not neutral about subscriptions, and that is the argument, not a hidden assumption: software you pay for once is cheaper over three years than software you rent, unless you need something only the rented one does.
How we put this guide together
We build a millwright's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for a millwright — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.
Where the numbers come from
Vendor pricingJobber $588/yr, Housecall Pro $948/yr, QuickBooks $456/yr, Square — taken from each company's published plans, last verified September 2026. Pricing moves; each name above links straight to that vendor’s own pricing page so you can confirm it before you decide.
Income contextThe $55,000 median we cite for the typical millwright is occupational median annual pay from the U.S. Bureau of Labor Statistics (Occupational Employment & Wage Statistics), compiled April 2026. We use it only to show software spend as a share of real income — your own numbers will differ.
Three-year mathMulti-year totals are today's list price multiplied by the number of years. No price rise is projected, so the figure can be checked against the vendor's own pricing page; if they raise it, the real cost is higher.
Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.
FAQ
Is Nexa really a Housecall Pro replacement?
For solo millwrights and small teams, yes. invoicing, scheduling, CRM, time tracking, task management, and full accounting — all for $279 once. Housecall Pro may be better if you have a large team (10+) or need enterprise-specific features.
What does Housecall Pro do that Nexa doesn't?
Housecall Pro has features like Online booking for home services and GPS tracking that some businesses rely on. For most solo millwrights, these aren't dealbreakers.
How fast does Nexa pay for itself?
At $79/month, Nexa pays for itself in 3.5 months. After that: $948 saved every year.
Can I pay in installments?
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.