QuickBooks costs helical pier installers $456/year at today's list price. Nexa is $279 once for invoicing, scheduling, CRM, time tracking and accounting in one suite — so it pays for itself in 7.3 months and you own it after that. What it is not: hosted-for-you software with a support desk and a roadmap you can lobby. That is the trade, and the rest of this page is the detail behind it.
The verdict for helical pier installers: QuickBooks is solid software, but at $38/month it costs $1,368 over 3 years. Nexa does most of what QuickBooks does for $279 once. For solo helical pier installers and small teams, Nexa is the better deal.
Today's list price is $38/month — $456 a year, from QuickBooks's own pricing page. Every figure below is that price, multiplied. Nothing is projected.
Nexa: $279 once (or 3 × $99). Over the same three years, that is $1,089 less.
If QuickBooks raises its price, the three-year cost goes up; if it cuts it, the cost comes down. We don't guess which. Add-ons, extra seats and card-processing fees are not included, on either side.
Today's sticker price only tells you what a subscription costs today. These are dated changes, each linked to the announcement or report it comes from. Tap one for the numbers.
For renewals on or after February 1, 2026, Pro Plus and Mac Plus went from $999 to $1,149 a year for one user, and each extra seat from $200 to $230.
Source: SWK Technologies, Insightful Accountant (Dec 2, 2025)
From July 1, 2025: Simple Start $35 to $38, Essentials $65 to $75, Plus $99 to $115, Advanced $235 to $275 a month.
Source: Woodard Report (May 27, 2025)
After September 30, 2024, new US customers can no longer buy these Desktop editions. Existing subscribers can keep renewing.
Source: Intuit
Only changes we can link to a vendor announcement or a named publication are listed. Plans, add-ons and discounts vary, so check the vendor's current pricing page before you decide.
| Feature | QuickBooks | Nexa |
|---|---|---|
| Invoicing | — | ✓ |
| Scheduling | ✗ | ✓ |
| CRM | ✗ | ✓ |
| Time Tracking | — | ✓ |
| Full Accounting | — | ✓ (SIMPL) |
| Task Management | ✗ | ✓ |
| Works offline | — | ✓ |
| Price | $38/mo | $279 once or 3 × $99 |
| 3-Year Total | $1,368 | $279 |
| You own it? | No — stop paying, lose access | Yes — forever |
✓ and ✗ for QuickBooks come from its own published feature list. — means the feature isn't in that list, which is not the same as QuickBooks lacking it: check with them. Three years is at today's price.
Straight from QuickBooks's own feature set. If one of these is the reason you pay them, that reason does not disappear because Nexa is cheaper.
QuickBooks is the better call if you need industry standard - accountants know it specifically, or if your team is large enough that per-seat pricing still beats buying software outright.
Software doesn't do the actual work — it automates the business around it. And that part is the same for every helical pier installer: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.
A lead, a call, a referral — and a quote or estimate that turns it into a booked job.
The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.
The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.
Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.
You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)
QuickBooks plus whatever else you're paying for:
Email yourself this comparison?
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
None of that is a software problem you can buy your way out of in one click — it is why the tool you pick matters more than what it costs. QuickBooks solves some of it. So does Nexa. The difference is what you are left holding in three years.
The median helical pier installer earns $55,000/year. At $456/year, QuickBooks is a recurring slice of that — paid again every year, whether the year was good or not. Owning the same jobs outright is $279 once, and the slice stops.
Nexa is $279 once. Invoicing, scheduling, CRM, time tracking, accounting — all connected, built for helical pier installers. You own it like you own your Hydraulic torque drive head (Eskridge or Pengo planetary motor) run off an excavator or skid steer auxiliary hydraulics.
An honest fit check — because the wrong tool is worse than no tool.
The honest fit: if you're a solo or small helical pier installers business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling past a handful of crews, a fleet platform may fit better — and we'd rather tell you that now than sell you the wrong thing.
Year-round construction in SoCal. Fire season (June-November) drives restoration demand. Drought impacts landscaping. Earthquake retrofitting is ongoing market.
Extreme summer heat drives HVAC demand. Hurricane risk on Gulf Coast. Year-round construction. Rapid population growth in DFW, Austin, Houston, San Antonio creates sustained demand. Freeze events (like 2021) create emergency plumbing/HVAC surge.
Hurricane season June-November creates massive restoration demand. Snowbird season November-March boosts service volume 30-40%. Year-round construction. Pool service is year-round industry. Pest control peaks in summer humidity.
Harsh winters in upstate, moderate in NYC. Construction limited in winter upstate. NYC market is enormous but hypercompetitive. Brownstone/pre-war building maintenance is specialized trade. NYC licensing is notoriously complex.
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
Morning starts at the yard loading lead sections, extensions, and the matched helix plates onto the trailer, double-checking shaft type against the engineer's design before the truck leaves. On site, the first hour is access and layout, staking pier locations off the foundation plan, confirming no buried utilities, and figuring out how to fit a mini ex into a four-foot side yard against a settling porch. The drive head couples to the first lead and it goes down clean to eight feet, then bites into clay and the torque gauge climbs; by the time it hits the design torque the crew has added two extensions and is logging the reading at every interval. Each pier gets its own line: location, total depth, final installation torque, calculated capacity. A few hit refusal early on cobble and have to be relocated; others chase soft fill deeper than anyone bid. Afternoon is bracket setup and the synchronized lift, cylinders pressurized in sequence while someone watches the laser and the drywall cracks for movement, lifting in fractions of an inch. The day ends writing up torque logs and elevation readings for the EOR, photographing every bracket, and texting the GC that piers 1 through 9 are in and inspection-ready.
Real helical pier installers near you who run their business on Nexa — book directly, no platform fee. Are you a helical pier installer? Post your business and get found in your area — $2.99 one-time. Or browse every helical pier installer on Nexa →
The tools of the trade — each a one-time buy that earns its keep for years.
Here's the bar that matters: you spent $44,000–$175,400 on tools that last for years, and never thought twice. So why should the software cost more than your whole kit — every single year? Hold it to the same standard as a good tool: $279, once.
The honest version. Nexa was built to beat the rented stack on the jobs that matter most to a helical pier installer — here's where it wins, where the integration wins it anyway, and the things it genuinely doesn't do, with who to use instead. (No tool is best at everything; a guide that pretends otherwise is just an ad.)
The usual subscriptions vs. Nexa, side by side. Drag the time slider — every year you keep renting, the gap widens. Nexa is $279, one time.
Prefer to own a piece outright instead of renting? Free and open-source tools (GnuCash, Invoice Ninja and the like) each handle one job if you'll self-host them — a real option, listed because it's true.
These are affiliate links — if you sign up through one, we may earn a commission at no extra cost to you. We list them because they're the honest best pick for the job, Nexa included. As an Amazon Associate we earn from qualifying purchases. Competitor pricing verified 2026-06-12.
We build a helical pier installer's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for a helical pier installer — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.
Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.
For solo helical pier installers and small teams, yes. invoicing, scheduling, CRM, time tracking, task management, and full accounting — all for $279 once. QuickBooks may be better if you have a large team (10+) or need enterprise-specific features.
QuickBooks has features like Industry standard - accountants know it and 800+ app integrations that some businesses rely on. For most solo helical pier installers, these aren't dealbreakers.
At $38/month, Nexa pays for itself in 7.3 months. After that: $456 saved every year.
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.
Own your tools. Stop renting your software.
Get Nexa — $279 Once