Jobber costs marble polishers $588/year at today's list price. Nexa is $279 once for invoicing, scheduling, CRM, time tracking and accounting in one suite — so it pays for itself in 5.7 months and you own it after that. What it is not: hosted-for-you software with a support desk and a roadmap you can lobby. That is the trade, and the rest of this page is the detail behind it.
The verdict for marble polishers: Jobber is solid software, but at $49/month it costs $1,764 over 3 years. Nexa does most of what Jobber does for $279 once. For solo marble polishers and small teams, Nexa is the better deal.
Today's list price is $49/month — $588 a year, from Jobber's own pricing page. Every figure below is that price, multiplied. Nothing is projected.
Nexa: $279 once (or 3 × $99). Over the same three years, that is $1,485 less.
If Jobber raises its price, the three-year cost goes up; if it cuts it, the cost comes down. We don't guess which. Add-ons, extra seats and card-processing fees are not included, on either side.
| Feature | Jobber | Nexa |
|---|---|---|
| Invoicing | — | ✓ |
| Scheduling | — | ✓ |
| CRM | — | ✓ |
| Time Tracking | — | ✓ |
| Full Accounting | — | ✓ (SIMPL) |
| Task Management | — | ✓ |
| Works offline | — | ✓ |
| Price | $49/mo | $279 once or 3 × $99 |
| 3-Year Total | $1,764 | $279 |
| You own it? | No — stop paying, lose access | Yes — forever |
✓ and ✗ for Jobber come from its own published feature list. — means the feature isn't in that list, which is not the same as Jobber lacking it: check with them. Three years is at today's price.
Straight from Jobber's own feature set. If one of these is the reason you pay them, that reason does not disappear because Nexa is cheaper.
Jobber is the better call if you need built for home services specifically, or if your team is large enough that per-seat pricing still beats buying software outright.
Software doesn't do the actual work — it automates the business around it. And that part is the same for every marble polisher: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.
A lead, a call, a referral — and a quote or estimate that turns it into a booked job.
The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.
The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.
Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.
You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)
Jobber plus whatever else you're paying for:
Email yourself this comparison?
Scheduling, job tracking, invoicing and client records are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot and carry their own booking link, with no per-appointment cut. The sections below price both routes honestly.
None of that is a software problem you can buy your way out of in one click — it is why the tool you pick matters more than what it costs. Jobber solves some of it. So does Nexa. The difference is what you are left holding in three years.
The median Marble Polisher earns $38,000/year. At $588/year, Jobber is a recurring slice of that — paid again every year, whether the year was good or not. Owning the same jobs outright is $279 once, and the slice stops.
Nexa is $279 once. Invoicing, scheduling, CRM, time tracking, accounting — all connected, built for marble polishers. You own it like you own your Variable-speed planetary floor polisher with weighted heads.
An honest fit check — because the wrong tool is worse than no tool.
The honest fit: if you're a solo or small marble polishers business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling past a handful of crews, a fleet platform may fit better — and we'd rather tell you that now than sell you the wrong thing.
Year-round construction in SoCal. Fire season (June-November) drives restoration demand. Drought impacts landscaping. Earthquake retrofitting is ongoing market.
Extreme summer heat drives HVAC demand. Hurricane risk on Gulf Coast. Year-round construction. Rapid population growth in DFW, Austin, Houston, San Antonio creates sustained demand. Freeze events (like 2021) create emergency plumbing/HVAC surge.
Hurricane season June-November creates massive restoration demand. Snowbird season November-March boosts service volume 30-40%. Year-round construction. Pool service is year-round industry. Pest control peaks in summer humidity.
Harsh winters in upstate, moderate in NYC. Construction limited in winter upstate. NYC market is enormous but hypercompetitive. Brownstone/pre-war building maintenance is specialized trade. NYC licensing is notoriously complex.
Scheduling, job tracking, invoicing and client records are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot and carry their own booking link, with no per-appointment cut. The sections below price both routes honestly.
First job is a marble foyer with dull, cloudy rings near the entry table where someone set down wet glasses, and the customer calls them stains, but they're acid etches, physical damage to the polish, so I explain the difference and that they have to be honed and re-polished, not just cleaned. I run the planetary polisher through a diamond grit progression, working from coarser to finer until the etches disappear and the shine comes back even across the floor, vacuuming up the wet slurry as I go. Second stop is a marble countertop with a deep oil stain in the stone, which a buff won't touch, so I mix a poultice, spread it over the stain, and tape it to draw the oil out over the next day. After lunch I'm on a floor with lippage, where the tile edges sit at slightly different heights, so before any polishing I flatten the high edges with aggressive diamonds, then bring the whole floor up through the grits to a uniform polish. The last job is a maintenance polish and reseal on a floor I restored last year. I always explain to customers why marble is different from granite, why acidic cleaners are banned on it, and why proper restoration takes the time it does, because the unhappy ones expected a one-hour buff. I seal the porous areas, do a final honing pass where needed, and log each floor's stone type and what I did so the next visit picks up where I left off.
Real marble polishers near you who run their business on Nexa — book directly, no platform fee. Are you a marble polisher? Post your business and get found in your area — $2.99 one-time. Or browse every marble polisher on Nexa →
The tools of the trade — each a one-time buy that earns its keep for years.
You paid for these once because good tools last. That's the bar your software should clear too — priced like a tool you own, $279 once, not a subscription that costs more than your kit every year.
The honest version. Nexa was built to beat the rented stack on the jobs that matter most to a marble polisher — here's where it wins, where the integration wins it anyway, and the things it genuinely doesn't do, with who to use instead. (No tool is best at everything; a guide that pretends otherwise is just an ad.)
The usual subscriptions vs. Nexa, side by side. Drag the time slider — every year you keep renting, the gap widens. Nexa is $279, one time.
On the work a marble polisher actually lives in — scheduling & booking, job & project tracking, invoicing and crm & clients — Nexa holds its own against the usual rentals (Calendly →, Jobber →, FreshBooks →). Head-to-head on any single one it's competitive; what tips it is the thing none of them can copy: From the booking to the etch-versus-stain call you logged to the invoice, each floor flows through one record so the honing done becomes the line you bill without re-keying. in one record, no re-typing between four apps. One tool, $279 once, against 4 subscriptions · ~$1,032/yr. Concretely: on scheduling & booking, Nexa keeps the marble-foyer booking tied to the account, so the customer calling the dull rings stains is one record with the honing job, not a calendar entry you later match to a client in a separate tool.
Where it's not the answer: if you run real payroll for a team (use Gusto →), or run big email campaigns & automations (use ConvertKit →). Those tools are better at their one thing, and we'd rather point you to them than pretend.
Prefer to own a piece outright instead of renting? Free and open-source tools (GnuCash, Invoice Ninja and the like) each handle one job if you'll self-host them — a real option, listed because it's true.
These are affiliate links — if you sign up through one, we may earn a commission at no extra cost to you. We list them because they're the honest best pick for the job, Nexa included. As an Amazon Associate we earn from qualifying purchases. Competitor pricing verified 2026-06-12.
We build a marble polisher's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for a marble polisher — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.
Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.
For solo marble polishers and small teams, yes. invoicing, scheduling, CRM, time tracking, task management, and full accounting — all for $279 once. Jobber may be better if you have a large team (10+) or need enterprise-specific features.
Jobber has features like Built for home services and Mobile app for field teams that some businesses rely on. For most solo marble polishers, these aren't dealbreakers.
At $49/month, Nexa pays for itself in 5.7 months. After that: $588 saved every year.
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.
Own your tools. Stop renting your software.
Get Nexa — $279 Once