Jobber costs leather repair technicians $588/year at today's list price. Nexa is $279 once for invoicing, scheduling, CRM, time tracking and accounting in one suite — so after 5.7 months it has cost less than Jobber, and you own it after that. What it is not: hosted-for-you software with a support desk and a roadmap you can lobby. That is the trade, and the rest of this page is the detail behind it.
Nexa is $279 once, about $23 a month over its first year. Its Drain Guard reads your expenses (from a linked bank, an imported statement, or ones you type in), finds the charges that repeat, and adds them up by the month. Keep or Cut then walks you through them one at a time. Cancel $23 a month of charges you'd forgotten about and Nexa has paid for itself inside the first year, before you count the Jobber bill you'd stop paying.
It depends on what you find and what you cancel, so we don't promise a number. In our demo data, Drain Guard finds 5 subscriptions adding up to $110.13 a month. That is sample data, not a customer's.
The verdict for leather repair technicians: Jobber is solid software, but at $49/month it costs $1,764 over 3 years. Nexa does most of what Jobber does for $279 once. For solo leather repair technicians and small teams, Nexa is the better deal.
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
None of that is a software problem you can buy your way out of in one click — it is why the tool you pick matters more than what it costs. Jobber solves some of it. So does Nexa. The difference is what you are left holding in three years.
Today's list price is $49/month — $588 a year, from Jobber's own pricing page. Every figure below is that price, multiplied. Nothing is projected.
Nexa: $279 once (or 3 × $99). Over the same three years, that is $1,485 less.
If Jobber raises its price, the three-year cost goes up; if it cuts it, the cost comes down. We don't guess which. Add-ons, extra seats and card-processing fees are not included, on either side.
| Feature | Jobber | Nexa |
|---|---|---|
| Invoicing | ✓ | ✓ |
| Scheduling | ✓ | ✓ |
| CRM | ✓ | ✓ |
| Time Tracking | — | ✓ |
| Full Accounting | — | ✓ (SIMPL) |
| Task Management | — | ✓ |
| Works offline | — | ✓ |
| Price | $49/mo | $279 once or 3 × $99 |
| 3-Year Total | $1,764 | $279 |
| You own it? | No — stop paying, lose access | Yes — forever |
✓ and ✗ for Jobber come from its own published feature list. — means the feature isn't in that list, which is not the same as Jobber lacking it: check with them. Three years is at today's price.
Straight from Jobber's own feature set. If one of these is the reason you pay them, that reason does not disappear because Nexa is cheaper.
Jobber is the better call if you need built for home services specifically, or if your team is large enough that per-seat pricing still beats buying software outright.
Jobber is built for home and commercial field service businesses. Its homepage names 12 trades, including cleaning, HVAC, landscaping, plumbing, roofing and tree care, and says it serves service pros in over 50 industries. (getjobber.com)
Read on each linked page in October 2026. Check them again before you decide; vendors change plans often.
Software doesn't do the actual work — it automates the business around it. And that part is the same for every leather repair technician: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.
A lead, a call, a referral — and a quote or estimate that turns it into a booked job.
The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.
The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.
Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.
You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)
This is the connection that makes the rest worth it. A leather repair technician's job already holds the services, the hours, the add-ons, and the materials — so the invoice builds itself from the work instead of you re-typing it at 9pm. Toggle an add-on or nudge the hours and watch it recompute.
You didn't write this invoice — the job did.
Jobber plus whatever else you're paying for:
Email yourself this comparison?
The median leather repair technician earns $55,000/year. At $588/year, Jobber is a recurring slice of that — paid again every year, whether the year was good or not. Owning the same jobs outright is $279 once, and the slice stops.
Nexa is $279 once. Invoicing, scheduling, CRM, time tracking, accounting — all connected, built for leather repair technicians. You own it like you own your heat-cure graining pads and texture mats.
An honest fit check — because the wrong tool is worse than no tool.
The honest fit: if you're a solo or small leather repair technicians business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling past a handful of crews, a fleet platform may fit better — and we'd rather tell you that now than sell you the wrong thing.
Year-round construction in SoCal. Fire season (June-November) drives restoration demand. Drought impacts landscaping. Earthquake retrofitting is ongoing market.
Extreme summer heat drives HVAC demand. Hurricane risk on Gulf Coast. Year-round construction. Rapid population growth in DFW, Austin, Houston, San Antonio creates sustained demand. Freeze events (like 2021) create emergency plumbing/HVAC surge.
Hurricane season June-November creates massive restoration demand. Snowbird season November-March boosts service volume 30-40%. Year-round construction. Pool service is year-round industry. Pest control peaks in summer humidity.
Harsh winters in upstate, moderate in NYC. Construction limited in winter upstate. NYC market is enormous but hypercompetitive. Brownstone/pre-war building maintenance is specialized trade. NYC licensing is notoriously complex.
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
Leather repair is part chemistry, part color-matching, and a lot of managing what the customer thinks leather is. A typical call is a worn driver's bolster, a cigarette burn, or a cracked dash, and the first job is figuring out what you're actually looking at — top-grain, a coated split, bonded leather that's flaking like sunburn, or straight vinyl, because each takes a different repair and a different honest expectation. You clean and degrease, because skin oils and conditioner kill adhesion. A tear gets a sub-patch slipped underneath and filler troweled flush, then you heat-cure it and stamp the grain back in with a texture pad so it doesn't read as a smooth scar. Color is the art: you spray sample chips and tweak the pigment by eye until it matches a panel that's been baking in the sun for ten years and has no factory equivalent left, then airbrush it in and blend the edges so there's no halo, sealing with a flexible topcoat so it doesn't crack when someone sits down. Much of this is mobile, so you're fighting overspray, garage dust settling into wet pigment, and curing times in whatever temperature the customer's driveway happens to be. Done right, nobody can find where you worked; done wrong, it cracks at the first cold morning.
Real leather repair technicians near you who run their business on Nexa — book directly, no platform fee. Are you a leather repair technician? Post your business and get found in your area — $2.99 one-time. Or browse every leather repair technician on Nexa →
The tools of the trade — each a one-time buy that earns its keep for years.
Here's the bar that matters: you spent $840–$4,100 on tools that last for years, and never thought twice. So why should the software cost more than your whole kit — every single year? Hold it to the same standard as a good tool: $279, once.
The honest version. Nexa was built to beat the rented stack on the jobs that matter most to a leather repair technician — here's where it wins, where the integration wins it anyway, and the things it genuinely doesn't do, with who to use instead. (No tool is best at everything; a guide that pretends otherwise is just an ad.)
The usual subscriptions vs. Nexa, side by side. Drag the time slider — every year you keep renting, the gap widens. Nexa is $279, one time.
On the work a leather repair technician actually lives in — job & project tracking, invoicing and books & accounting — Nexa holds its own against the usual rentals (Jobber →, FreshBooks →, QuickBooks →). Head-to-head on any single one it's competitive; what tips it is the thing none of them can copy: Nexa carries one seat from the leather diagnosis to the color match to the invoice and the books as one record, so the bolster you blended never has to be re-typed between separate apps. in one record, no re-typing between four apps. One tool, $279 once, against 3 subscriptions · ~$1,044/yr. Concretely: on job & project tracking, When you finally blend a worn bolster into ten-year sun-faded tan that no factory color matches anymore, that color work and the substrate that may crack again land on the same job, so the repair is on record and a standalone scheduler can never capture which leather you were actually fixing.
Where it's not the answer: if you run real payroll for a team (use Gusto →), or run big email campaigns & automations (use ConvertKit →). Those tools are better at their one thing, and we'd rather point you to them than pretend.
Prefer to own a piece outright instead of renting? Free and open-source tools (GnuCash, Invoice Ninja and the like) each handle one job if you'll self-host them — a real option, listed because it's true.
Competitor pricing verified 2026-06-12.
We build a leather repair technician's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for a leather repair technician — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.
Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.
For solo leather repair technicians and small teams, yes. invoicing, scheduling, CRM, time tracking, task management, and full accounting — all for $279 once. Jobber may be better if you have a large team (10+) or need enterprise-specific features.
Jobber has features like Built for home services and Mobile app for field teams that some businesses rely on. For most solo leather repair technicians, these aren't dealbreakers.
At $49/month, Nexa pays for itself in 5.7 months. After that: $588 saved every year.
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.
Own your tools. Stop renting your software.
Get Nexa — $279 Once