Jobber vs Nexa The Real Comparison for Heavy Equipment Mechanics
Jobber
$49/mo ($588/yr)
VS
Nexa
$279 once — own forever
or 3 payments of $99
Break even: 5.7 months at Jobber's current price.
Bottom Line
Jobber costs heavy equipment mechanics $588/year at today's list price. Nexa is $279 once for invoicing, scheduling, CRM, time tracking and accounting in one suite — so it pays for itself in 5.7 months and you own it after that. What it is not: hosted-for-you software with a support desk and a roadmap you can lobby. That is the trade, and the rest of this page is the detail behind it.
The verdict for heavy equipment mechanics: Jobber is solid software, but at $49/month it costs $1,764 over 3 years. Nexa does most of what Jobber does for $279 once. For solo heavy equipment mechanics and small teams, Nexa is the better deal.
Choose Nexa if:
You're done paying monthly forever
You're a solo operator or small team (1-5)
You need time-tracker, Invoicing, task-manager in one purchase in one tool
You're tired of price increases
You want to own your tools like you own your equipment
Choose Jobber if:
You have a large team (10+) needing enterprise features
You're deeply invested in Jobber's specific workflow
You need a feature Nexa doesn't have yet
What Jobber Actually Costs Heavy Equipment Mechanics
Today's list price is $49/month — $588 a year, from Jobber's own pricing page. Every figure below is that price, multiplied. Nothing is projected.
Three years at today's price
Year 1$588
Year 2$588
Year 3$588
Three years of Jobber$1,764
Nexa: $279 once (or 3 × $99). Over the same three years, that is $1,485 less.
If Jobber raises its price, the three-year cost goes up; if it cuts it, the cost comes down. We don't guess which. Add-ons, extra seats and card-processing fees are not included, on either side.
Feature-by-Feature
Feature
Jobber
Nexa
Invoicing
—
✓
Scheduling
—
✓
CRM
—
✓
Time Tracking
—
✓
Full Accounting
—
✓ (SIMPL)
Task Management
—
✓
Works offline
—
✓
Price
$49/mo
$279 once or 3 × $99
3-Year Total
$1,764
$279
You own it?
No — stop paying, lose access
Yes — forever
✓ and ✗ for Jobber come from its own published feature list. — means the feature isn't in that list, which is not the same as Jobber lacking it: check with them. Three years is at today's price.
What "$279 Once" Does And Doesn't Buy
It buys the software, not a service contract. You install Nexa and it runs on your machine. There is no seat count, and nothing stops working if you stop paying, because there is nothing to stop paying.
Jobber's monthly fee is not only rent. It pays for their hosting, their support desk, and their engineers shipping changes every week. If those matter to how you work, that is a real thing you would be giving up.
Cross-device sync is the one optional extra — $4.99/month if you want your data mirrored between machines. Skip it and Nexa still works; you just sync manually.
The honest risk of buying once: you are betting on us still being here to improve it. The honest risk of renting: the price is theirs to raise, and the graveyard section below is a record of tools that did exactly that.
What Jobber Does Better
Straight from Jobber's own feature set. If one of these is the reason you pay them, that reason does not disappear because Nexa is cheaper.
Built for home services
Mobile app for field teams
Route optimization
Client hub for self-service
QuickBooks Online integration
A smaller bill up front: plans start at $49/month, against $279 paid once for Nexa.
Jobber is the better call if you need built for home services specifically, or if your team is large enough that per-seat pricing still beats buying software outright.
Where business tools fit — for a heavy equipment mechanic
Software doesn't do the actual work — it automates the business around it. And that part is the same for every heavy equipment mechanic: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.
1
Find the work
Win the job
↓
A lead, a call, a referral — and a quote or estimate that turns it into a booked job.
CRM / contacts
Estimates & proposals
Booking / scheduling
then ↓
2
Manage the work
Do the job
↓
The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.
Job / project tracking
Time tracking
Expenses, materials & add-ons
then ↓
3
Bill for it
Send the bill
↓
The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.
Invoicing
Deposits & credits
then ↓
4
Get paid
Collect payment
↓
Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.
Card / online payments
Automatic reminders
You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)
Watch a job become an invoice
This is the connection that makes the rest worth it. A heavy equipment mechanic's job already holds the services, the hours, the add-ons, and the materials — so the invoice builds itself from the work instead of you re-typing it at 9pm. Toggle an add-on or nudge the hours and watch it recompute.
The job Excavator hydraulic hose failure, field repair
ServiceService truck call-out1 × $195$195
ServiceHydraulic fluid top-off and system bleed1 × $90$90
TimeLabor — tracked on the job
5 hrs× $135/hr$675
MaterialsCrimped hydraulic hoses and fittings$420
MaterialsHydraulic oil, 10 gal$180
→
The invoice builds itself
Subtotal$0
Invoice total$0
You didn't write this invoice — the job did.
Calculate Your Full Stack
Jobber plus whatever else you're paying for:
Email yourself this comparison?
Switching from Jobber
1
Export your data — Go to Settings → Data Export. Download clients, jobs, and invoices as CSV.
2
Set up Nexa — 15-minute setup. Import your client list and job categories.
3
Parallel run — Run both for 1-2 weeks to verify scheduled jobs transfer cleanly.
4
Cancel Jobber — Cancel subscription before your next billing cycle. Download final export.
✓ 30-day money-back guarantee. Zero risk.
Sound Familiar?
Heavy equipment mechanics often don't work in a shop at all; they work wherever the machine died, which means a muddy job site, a quarry, or a logging deck reached by a service truck loaded with hydraulics tools, a crane, and an air compressor. The day frequently starts with a down call: an excavator that won't swing, a dozer leaking hydraulic oil, or a loader throwing a fault on the OEM laptop. Field diagnosis is its own skill, since the machine can't come to a lift and a hydraulic pressure test in a ditch is the only way to know if it's a pump, a valve, or a cylinder. The work is heavy in every sense, with final drives, track chains, and components that need a press or a crane just to handle. Preventive maintenance is the quieter half of the job: reading hour meters, changing fluids and filters, measuring undercarriage wear, and telling a contractor when a rebuild is coming so a failure doesn't strand a crew. The biggest frustration isn't the iron; it's the logistics. Travel time, crane hours, and parts runs pile up before a single repair begins, and keeping each machine's hour-meter and wear history straight across a contractor's fleet is what separates planned rebuilds from emergency tows. Get that history wrong and the next breakdown costs the customer a day of downtime.
Diagnosing a hydraulic fault in the field when a dozer is stuck on a job site and can't move to the shop
Pricing field service when travel, a service truck, and crane time eat hours before the first bolt turns
Tracking hour-meter readings so preventive maintenance on a fleet of machines doesn't slip
Keeping undercarriage and component-wear history straight so a contractor plans rebuilds instead of failures
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
None of that is a software problem you can buy your way out of in one click — it is why the tool you pick matters more than what it costs. Jobber solves some of it. So does Nexa. The difference is what you are left holding in three years.
What This Means for Heavy Equipment Mechanics
The median heavy equipment mechanic earns $55,000/year. At $588/year, Jobber is a recurring slice of that — paid again every year, whether the year was good or not. Owning the same jobs outright is $279 once, and the slice stops.
Nexa is $279 once. Invoicing, scheduling, CRM, time tracking, accounting — all connected, built for heavy equipment mechanics. You own it like you own your hydraulic flow and pressure test kit.
Is Nexa actually right for a heavy equipment mechanic?
An honest fit check — because the wrong tool is worse than no tool.
Right for you if
You run solo or a small crew — like the 15,000 heavy equipment mechanics in the US who do, and you wear every hat.
You're tired of paying every month for a monthly subscription stack and a pile of apps that don't talk to each other.
You want to invoice, schedule, and track from the field — not from a back office.
You'd rather own your software once, the way you own your hydraulic flow and pressure test kit.
Look elsewhere if
You run a 20+ heavy equipment mechanic fleet that needs enterprise dispatch and multi-crew routing — Nexa is built for 1–5, and a fleet platform will serve you better.
You need full payroll for a large team or deep, SKU-level inventory — that's not what Nexa is for.
You're genuinely happy paying monthly and don't mind stitching tools together. No tool fixes a workflow you already like.
The honest fit: if you're a solo or small heavy equipment mechanics business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling past a handful of crews, a fleet platform may fit better — and we'd rather tell you that now than sell you the wrong thing.
Heavy Equipment Mechanics by the numbers — by place
Tax, licensing & seasonality where you operate
1-13.3%income tax
CSLB (Contractors State License Board)licensing
Year-round construction in SoCal. Fire season (June-November) drives restoration demand. Drought impacts landscaping. Earthquake retrofitting is ongoing market.
DBPR (Dept of Business and Professional Regulation)licensing
Hurricane season June-November creates massive restoration demand. Snowbird season November-March boosts service volume 30-40%. Year-round construction. Pool service is year-round industry. Pest control peaks in summer humidity.
Harsh winters in upstate, moderate in NYC. Construction limited in winter upstate. NYC market is enormous but hypercompetitive. Brownstone/pre-war building maintenance is specialized trade. NYC licensing is notoriously complex.
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
What heavy equipment mechanics actually deal with
Diagnosing a hydraulic fault in the field when a dozer is stuck on a job site and can't move to the shop
Pricing field service when travel, a service truck, and crane time eat hours before the first bolt turns
Tracking hour-meter readings so preventive maintenance on a fleet of machines doesn't slip
Keeping undercarriage and component-wear history straight so a contractor plans rebuilds instead of failures
A day in the life of a heavy equipment mechanic
Heavy equipment mechanics often don't work in a shop at all; they work wherever the machine died, which means a muddy job site, a quarry, or a logging deck reached by a service truck loaded with hydraulics tools, a crane, and an air compressor. The day frequently starts with a down call: an excavator that won't swing, a dozer leaking hydraulic oil, or a loader throwing a fault on the OEM laptop. Field diagnosis is its own skill, since the machine can't come to a lift and a hydraulic pressure test in a ditch is the only way to know if it's a pump, a valve, or a cylinder. The work is heavy in every sense, with final drives, track chains, and components that need a press or a crane just to handle. Preventive maintenance is the quieter half of the job: reading hour meters, changing fluids and filters, measuring undercarriage wear, and telling a contractor when a rebuild is coming so a failure doesn't strand a crew. The biggest frustration isn't the iron; it's the logistics. Travel time, crane hours, and parts runs pile up before a single repair begins, and keeping each machine's hour-meter and wear history straight across a contractor's fleet is what separates planned rebuilds from emergency tows. Get that history wrong and the next breakdown costs the customer a day of downtime.
The tools a working heavy equipment mechanic actually owns
The tools of the trade — each a one-time buy that earns its keep for years.
Core kitEssential
Hydraulic flow and pressure test kit
$1,500–$8,000
Core kitEssential
OEM diagnostic laptop and licences
$3,000–$15,000
Core kitEssential
Track tension and undercarriage wear gauges
$400–$2,000
Core kitEssential
High-tonnage hydraulic press
$800–$4,000
Core kitEssential
Puller and bearing separator set
$300–$1,800
Core kitEssential
Torque wrench and multiplier
$300–$1,500
Core kitEssential
Service truck with crane and compressor
$60,000–$180,000
Core kitEssential
Hydraulic hose crimper
$2,000–$10,000
Upgrade
Particle counter for oil analysis
$2,000–$10,000
The core kit, bought once$68,300–$222,300
Here's the bar that matters: you spent $68,300–$222,300 on tools that last for years, and never thought twice. So why should the software cost more than your whole kit — every single year? Hold it to the same standard as a good tool: $279, once.
What Nexa does for a heavy equipment mechanic — and what it doesn't
The honest version. Nexa was built to beat the rented stack on the jobs that matter most to a heavy equipment mechanic — here's where it wins, where the integration wins it anyway, and the things it genuinely doesn't do, with who to use instead. (No tool is best at everything; a guide that pretends otherwise is just an ad.)
Compare the essential business tools for heavy equipment mechanics
The usual subscriptions vs. Nexa, side by side. Drag the time slider — every year you keep renting, the gap widens. Nexa is $279, one time.
The reason it wins the set: The down-machine call, the field diagnosis and repair, the travel and crane hours, the hour-meter and PM tracking, the invoice, the payment, and your books are one record from the cut to paid. in one record — $279 once vs 3 subscriptions · ~$1,044/yr.
What Nexa takes off your plate
Job & project trackingvs Jobber →When a dozer is stuck mid-grade in the cut with no hydraulics, the field diagnosis, the parts off the service truck, and the hour-meter reading attach to the job right where the machine died, so preventive maintenance across the fleet does not slip.
Invoicingvs FreshBooks →Field service where travel, the service truck, and crane time eat hours before the first bolt turns bills off the job that captured all of it, so those hours land on the invoice instead of being reconstructed back at the shop.
Books & accountingvs QuickBooks →Payment posts back to the machine and the field job it covered, so your books reflect each repair against the unit and its hour-meter history without re-keying from a paper ticket.
When you run big email campaigns & automations→ ConvertKit →
Prefer to own a piece outright instead of renting? Free and open-source tools (GnuCash, Invoice Ninja and the like) each handle one job if you'll self-host them — a real option, listed because it's true.
These are affiliate links — if you sign up through one, we may earn a commission at no extra cost to you. We list them because they're the honest best pick for the job, Nexa included. As an Amazon Associate we earn from qualifying purchases. Competitor pricing verified 2026-06-12.
How To Read This Page
We make Nexa. It is one of the two options compared here, so read this with that in mind. We have tried to make Jobber's case the way we would want ours made — their strengths above are their own published feature list, not our summary of it.
The prices are Jobber's published list prices, checked on the date shown in the sources below. Plans change; check theirs before you decide.
No customer quotes appear on this page because we do not have any from heavy equipment mechanics we can verify. For user testimony, read the independent reviews — Jobber on G2 and on Capterra — where the reviewers are not selling you anything.
Some links on this page earn us money. Tool links may be affiliate links paying us a commission at no extra cost to you, including links to Jobber itself. We list a tool when it is the honest pick for the job, not because of the payout.
Check the price yourself:Jobber's own pricing page is the source for every figure above, read on the date shown in the sources section below.
We are not neutral about subscriptions, and that is the argument, not a hidden assumption: software you pay for once is cheaper over three years than software you rent, unless you need something only the rented one does.
How we put this guide together
We build a heavy equipment mechanic's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for a heavy equipment mechanic — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.
Where the numbers come from
Vendor pricingJobber $588/yr, Housecall Pro $948/yr, QuickBooks $456/yr, Square — taken from each company's published plans, last verified September 2026. Pricing moves; each name above links straight to that vendor’s own pricing page so you can confirm it before you decide.
Income contextThe $55,000 median we cite for the typical heavy equipment mechanic is occupational median annual pay from the U.S. Bureau of Labor Statistics (Occupational Employment & Wage Statistics), compiled April 2026. We use it only to show software spend as a share of real income — your own numbers will differ.
The field's own bodiesWe anchor what heavy equipment mechanics actually need to the people who set the standards — ASA. We don't speak for them; we point you to them so you can weigh this guide against the profession's own.
Three-year mathMulti-year totals are today's list price multiplied by the number of years. No price rise is projected, so the figure can be checked against the vendor's own pricing page; if they raise it, the real cost is higher.
Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.
FAQ
Is Nexa really a Jobber replacement?
For solo heavy equipment mechanics and small teams, yes. invoicing, scheduling, CRM, time tracking, task management, and full accounting — all for $279 once. Jobber may be better if you have a large team (10+) or need enterprise-specific features.
What does Jobber do that Nexa doesn't?
Jobber has features like Built for home services and Mobile app for field teams that some businesses rely on. For most solo heavy equipment mechanics, these aren't dealbreakers.
How fast does Nexa pay for itself?
At $49/month, Nexa pays for itself in 5.7 months. After that: $588 saved every year.
Can I pay in installments?
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.