What handymen need from their software, from sources outside Jobber and outside Nexa:
Jobber covers the day-to-day running of a handyman business well. Its Core plan has scheduling, quotes, invoices with online payments and reporting. Higher plans add job costing, time and expense tracking and QuickBooks Online sync, and its mobile app and Jobber Academy help new users get going. What its published features don't show is the trade-specific part. Nothing listed rolls related quotes and invoices into one project total to watch an unlicensed-work cap, flags permit-required jobs, prints a 'not a licensed contractor' disclosure, handles resale certificates, or collects W-9s and totals payments per payee for 1099-NEC. A handyman would likely need to check each of these with Jobber directly or handle them outside the software.
Nexa gets closer on two points. It has jobs with costing and profit per job, Missions (projects) with sub-steps, 1099 summaries and sales tax tracking. It also has expenses, bank reconciliation, invoicing and a pay portal that uses your own Stripe account. It does not state that it totals a project's labor and materials against a cap, flags permit jobs, prints the unlicensed disclosure or manages resale certificates. It also has no text messaging, no QuickBooks or Xero sync, no route optimization or dispatch board, no payroll and no hosted support desk. Its automated emails (reminders, sequences, workflows) send only while Nexa is open on one of your devices. It is software you own and run yourself.
Over three years Jobber at $49 a month comes to $588 a year, or $1,764. Nexa is $279 once, or $458.64 with the optional $4.99 a month Cloud Sync for the full three years. Without sync it runs on one device. The price gap is large, but it only matters if the tool does the trade's core job. A handyman who needs text messages, QuickBooks sync, routing or crew scheduling should stay with Jobber. A solo handyman who mostly needs invoices, job profit and 1099 totals could consider Nexa. Anyone who must stay under a per-project cap should confirm the project total, permit flag and disclosure features before paying for either.
Our read for handymen: Neither product shows per-project contract-total tracking, permit flags and the unlicensed disclosure, so a handyman working under a licensing cap should look for a trade-specific compliance and project-tracking tool, or build those checks into their own paperwork.
Read on each linked page in October 2026. Check them again before you decide; vendors change plans often.
Jobber costs handymen $588/year at today's list price. Nexa is $279 once for invoicing, scheduling, CRM, time tracking and accounting in one suite — so after 5.7 months it has cost less than Jobber, and you own it after that. What it is not: hosted-for-you software with a support desk and a roadmap you can lobby. That is the trade, and the rest of this page is the detail behind it.
Nexa is $279 once, about $23 a month over its first year. Its Drain Guard reads your expenses (from a linked bank, an imported statement, or ones you type in), finds the charges that repeat, and adds them up by the month. Keep or Cut then walks you through them one at a time. Cancel $23 a month of charges you'd forgotten about and Nexa has paid for itself inside the first year, before you count the Jobber bill you'd stop paying.
It depends on what you find and what you cancel, so we don't promise a number. In our demo data, Drain Guard finds 5 subscriptions adding up to $110.13 a month. That is sample data, not a customer's.
The verdict for handymen: Neither Jobber nor Nexa is the main system for this work; start with software built for it. Nexa only makes sense beside it, at $279 once against $1,764 for Jobber over three years.
Invoicing, scheduling and job tracking are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot and carry their own booking link, with no per-appointment cut. The sections below price both routes honestly.
None of that is a software problem you can buy your way out of in one click — it is why the tool you pick matters more than what it costs. Jobber solves some of it. So does Nexa. The difference is what you are left holding in three years.
Today's list price is $49/month — $588 a year, from Jobber's own pricing page. Every figure below is that price, multiplied. Nothing is projected.
Nexa: $279 once (or 3 × $99). Over the same three years, that is $1,485 less.
If Jobber raises its price, the three-year cost goes up; if it cuts it, the cost comes down. We don't guess which. Add-ons, extra seats and card-processing fees are not included, on either side.
| Feature | Jobber | Nexa |
|---|---|---|
| Invoicing | ✓ | ✓ |
| Scheduling | ✓ | ✓ |
| CRM | ✓ | ✓ |
| Time Tracking | — | ✓ |
| Full Accounting | — | ✓ (SIMPL) |
| Task Management | — | ✓ |
| Works offline | — | ✓ |
| Price | $49/mo | $279 once or 3 × $99 |
| 3-Year Total | $1,764 | $279 |
| You own it? | No — stop paying, lose access | Yes — forever |
✓ and ✗ for Jobber come from its own published feature list. — means the feature isn't in that list, which is not the same as Jobber lacking it: check with them. Three years is at today's price.
Straight from Jobber's own feature set. If one of these is the reason you pay them, that reason does not disappear because Nexa is cheaper.
Jobber is the better call if you need built for home services specifically, or if your team is large enough that per-seat pricing still beats buying software outright.
Jobber is built for home and commercial field service businesses. Its homepage names 12 trades, including cleaning, HVAC, landscaping, plumbing, roofing and tree care, and says it serves service pros in over 50 industries. (getjobber.com)
Read on each linked page in October 2026. Check them again before you decide; vendors change plans often.
Software doesn't do the actual work — it automates the business around it. And that part is the same for every handyman: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.
A lead, a call, a referral — and a quote or estimate that turns it into a booked job.
The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.
The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.
Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.
You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)
This is the connection that makes the rest worth it. A handyman's job already holds the services, the hours, the add-ons, and the materials — so the invoice builds itself from the work instead of you re-typing it at 9pm. Toggle an add-on or nudge the hours and watch it recompute.
You didn't write this invoice — the job did.
Jobber plus whatever else you're paying for:
Email yourself this comparison?
The median handyman earns $42,000/year. At $588/year, Jobber is a recurring slice of that — paid again every year, whether the year was good or not. Owning the same jobs outright is $279 once, and the slice stops.
Nexa is $279 once. Invoicing, scheduling, CRM, time tracking, accounting — all connected, built for handymen. You own it like you own your Cordless drill / impact driver set.
An honest fit check — because the wrong tool is worse than no tool.
The honest fit: if you're a solo or small handymen business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling past a handful of crews, a fleet platform may fit better — and we'd rather tell you that now than sell you the wrong thing.
Year-round construction in SoCal. Fire season (June-November) drives restoration demand. Drought impacts landscaping. Earthquake retrofitting is ongoing market.
Extreme summer heat drives HVAC demand. Hurricane risk on Gulf Coast. Year-round construction. Rapid population growth in DFW, Austin, Houston, San Antonio creates sustained demand. Freeze events (like 2021) create emergency plumbing/HVAC surge.
Hurricane season June-November creates massive restoration demand. Snowbird season November-March boosts service volume 30-40%. Year-round construction. Pool service is year-round industry. Pest control peaks in summer humidity.
Harsh winters in upstate, moderate in NYC. Construction limited in winter upstate. NYC market is enormous but hypercompetitive. Brownstone/pre-war building maintenance is specialized trade. NYC licensing is notoriously complex.
Your people are already online — swapping real numbers, tool picks, and war stories. Here's where to find them.
Active community — tool picks, pricing, and day-to-day questions.
Open on Reddit →Active community — tool picks, pricing, and day-to-day questions.
Open on Reddit →Active community — tool picks, pricing, and day-to-day questions.
Open on Reddit →Active community — tool picks, pricing, and day-to-day questions.
Open on Reddit →Invoicing, scheduling and job tracking are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot and carry their own booking link, with no per-appointment cut. The sections below price both routes honestly.
My week is a stack of small jobs that most contractors won't touch: a door that won't latch, a leaky faucet, drywall patches, a ceiling fan, grab bars in a bathroom, a fence board that blew off. The skill is knowing a little about everything and knowing where my licence stops; I don't do panel work or gas lines, and I tell customers when they need a licensed trade. Every visit starts with seeing the problem in person, because the photo never shows it right. Many jobs turn into three once I'm in the house; the customer walks me around with a list, and a two-hour visit becomes a full day. I price most jobs by the hour with a minimum, and I bring the common parts on the truck so I'm not driving to the hardware store twice. Scheduling is a puzzle: I group jobs by neighbourhood so I'm not burning the day in traffic. Older customers are a big share of my work, and trust is everything; they give me a key and expect me to show up when I said.
Real handymen near you who run their business on Nexa — book directly, no platform fee. Are you a handyman? Post your business and get found in your area — $2.99 one-time. Or browse every handyman on Nexa →
The tools of the trade — each a one-time buy that earns its keep for years.
Here's the bar that matters: you spent $850–$2,270 on tools that last for years, and never thought twice. So why should the software cost more than your whole kit — every single year? Hold it to the same standard as a good tool: $279, once.
We build a handyman's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for a handyman — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.
Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.
For solo handymen and small teams, yes. invoicing, scheduling, CRM, time tracking, task management, and full accounting — all for $279 once. Jobber may be better if you have a large team (10+) or need enterprise-specific features.
Jobber has features like Built for home services and Mobile app for field teams that some businesses rely on. For most solo handymen, these aren't dealbreakers.
At $49/month, Nexa pays for itself in 5.7 months. After that: $588 saved every year.
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.
Own your tools. Stop renting your software.
Get Nexa — $279 Once