Jobber vs Nexa The Real Comparison for Grading Contractors
Jobber
$49/mo ($588/yr)
VS
Nexa
$279 once — own forever
or 3 payments of $99
Break even: 5.7 months at Jobber's current price.
Bottom Line
Jobber costs grading contractors $588/year at today's list price. Nexa is $279 once for invoicing, scheduling, CRM, time tracking and accounting in one suite — so it pays for itself in 5.7 months and you own it after that. What it is not: hosted-for-you software with a support desk and a roadmap you can lobby. That is the trade, and the rest of this page is the detail behind it.
The verdict for grading contractors: Jobber is solid software, but at $49/month it costs $1,764 over 3 years. Nexa does most of what Jobber does for $279 once. For solo grading contractors and small teams, Nexa is the better deal.
Choose Nexa if:
You're done paying monthly forever
You're a solo operator or small team (1-5)
You need time-tracker, Invoicing, task-manager in one purchase in one tool
You're tired of price increases
You want to own your tools like you own your equipment
Choose Jobber if:
You have a large team (10+) needing enterprise features
You're deeply invested in Jobber's specific workflow
You need a feature Nexa doesn't have yet
What Jobber Actually Costs Grading Contractors
Today's list price is $49/month — $588 a year, from Jobber's own pricing page. Every figure below is that price, multiplied. Nothing is projected.
Three years at today's price
Year 1$588
Year 2$588
Year 3$588
Three years of Jobber$1,764
Nexa: $279 once (or 3 × $99). Over the same three years, that is $1,485 less.
If Jobber raises its price, the three-year cost goes up; if it cuts it, the cost comes down. We don't guess which. Add-ons, extra seats and card-processing fees are not included, on either side.
Feature-by-Feature
Feature
Jobber
Nexa
Invoicing
—
✓
Scheduling
—
✓
CRM
—
✓
Time Tracking
—
✓
Full Accounting
—
✓ (SIMPL)
Task Management
—
✓
Works offline
—
✓
Price
$49/mo
$279 once or 3 × $99
3-Year Total
$1,764
$279
You own it?
No — stop paying, lose access
Yes — forever
✓ and ✗ for Jobber come from its own published feature list. — means the feature isn't in that list, which is not the same as Jobber lacking it: check with them. Three years is at today's price.
What "$279 Once" Does And Doesn't Buy
It buys the software, not a service contract. You install Nexa and it runs on your machine. There is no seat count, and nothing stops working if you stop paying, because there is nothing to stop paying.
Jobber's monthly fee is not only rent. It pays for their hosting, their support desk, and their engineers shipping changes every week. If those matter to how you work, that is a real thing you would be giving up.
Cross-device sync is the one optional extra — $4.99/month if you want your data mirrored between machines. Skip it and Nexa still works; you just sync manually.
The honest risk of buying once: you are betting on us still being here to improve it. The honest risk of renting: the price is theirs to raise, and the graveyard section below is a record of tools that did exactly that.
What Jobber Does Better
Straight from Jobber's own feature set. If one of these is the reason you pay them, that reason does not disappear because Nexa is cheaper.
Built for home services
Mobile app for field teams
Route optimization
Client hub for self-service
QuickBooks Online integration
A smaller bill up front: plans start at $49/month, against $279 paid once for Nexa.
Jobber is the better call if you need built for home services specifically, or if your team is large enough that per-seat pricing still beats buying software outright.
Where business tools fit — for a grading contractor
Software doesn't do the actual work — it automates the business around it. And that part is the same for every grading contractor: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.
1
Find the work
Win the job
↓
A lead, a call, a referral — and a quote or estimate that turns it into a booked job.
CRM / contacts
Estimates & proposals
Booking / scheduling
then ↓
2
Manage the work
Do the job
↓
The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.
Job / project tracking
Time tracking
Expenses, materials & add-ons
then ↓
3
Bill for it
Send the bill
↓
The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.
Invoicing
Deposits & credits
then ↓
4
Get paid
Collect payment
↓
Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.
Card / online payments
Automatic reminders
You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)
Calculate Your Full Stack
Jobber plus whatever else you're paying for:
Email yourself this comparison?
Switching from Jobber
1
Export your data — Go to Settings → Data Export. Download clients, jobs, and invoices as CSV.
2
Set up Nexa — 15-minute setup. Import your client list and job categories.
3
Parallel run — Run both for 1-2 weeks to verify scheduled jobs transfer cleanly.
4
Cancel Jobber — Cancel subscription before your next billing cycle. Download final export.
✓ 30-day money-back guarantee. Zero risk.
Sound Familiar?
I walk the site first with the plans and the grade stakes, checking the surveyor's hubs against the design because everything I do today is chasing tenths of a foot. The job is a building pad and a driveway that has to drain to the street. I fire up the grade-control system, and the GPS keeps the blade on the design surface as I make passes - but the subgrade clay is wet from last night, so I'm spreading and letting it dry before I compact, because rolling wet clay just pumps and fails later. Mid-morning the erosion inspector swings by; my silt fence is trenched in and the inlet protection's good, so no stop-work, but I've seen jobs shut down over a torn fence. I cut the high side, move the spoil to fill the low corner - keeping cut and fill balanced so I'm not trucking dirt I didn't bid. Afternoon is fine grade: box blade passes until the pad is flat to tolerance and the driveway falls a clean two percent to the gutter. I roll it in lifts, proof it, and shoot grades across the pad to prove it drains and meets spec for the as-built. Last hour is photographing the finished grades, marking the lifts I compacted for the inspector, invoicing for the dirt actually moved, and confirming tomorrow's site has the stakes set and access for the lowboy.
Hitting precise slope and drainage specs - a pad or driveway has to fall the right percentage to drain, and being off a fraction means water ponds, a slab cracks, or the engineer rejects the as-built
Soil moisture and compaction - grading wet clay or failing to compact in lifts means the fill settles later and the customer blames the finished surface that looked perfect on day one
Erosion-control and stormwater (SWPPP) compliance - silt fence, inlet protection, and stabilization the inspector checks, with stop-work orders and fines if the site sheds mud into a storm drain
Balancing cut and fill across a site - misjudging the earthwork quantities means importing or hauling dirt that wasn't in the bid, and grade-tolerance disputes when the surveyor's as-built doesn't match
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
None of that is a software problem you can buy your way out of in one click — it is why the tool you pick matters more than what it costs. Jobber solves some of it. So does Nexa. The difference is what you are left holding in three years.
What This Means for Grading Contractors
The median Grading Contractor earns $55,000/year. At $588/year, Jobber is a recurring slice of that — paid again every year, whether the year was good or not. Owning the same jobs outright is $279 once, and the slice stops.
Nexa is $279 once. Invoicing, scheduling, CRM, time tracking, accounting — all connected, built for grading contractors. You own it like you own your Motor grader or a box blade on a tractor.
Is Nexa actually right for a grading contractor?
An honest fit check — because the wrong tool is worse than no tool.
Right for you if
You run solo or a small crew — like the 15,000 grading contractors in the US who do, and you wear every hat.
You're tired of paying every month for a monthly subscription stack and a pile of apps that don't talk to each other.
You want to invoice, schedule, and track from the field — not from a back office.
You'd rather own your software once, the way you own your Motor grader or a box blade on a tractor.
Look elsewhere if
You run a 20+ grading contractor fleet that needs enterprise dispatch and multi-crew routing — Nexa is built for 1–5, and a fleet platform will serve you better.
You need full payroll for a large team or deep, SKU-level inventory — that's not what Nexa is for.
You're genuinely happy paying monthly and don't mind stitching tools together. No tool fixes a workflow you already like.
The honest fit: if you're a solo or small grading contractors business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling past a handful of crews, a fleet platform may fit better — and we'd rather tell you that now than sell you the wrong thing.
Grading Contractors by the numbers — by place
Tax, licensing & seasonality where you operate
1-13.3%income tax
CSLB (Contractors State License Board)licensing
Year-round construction in SoCal. Fire season (June-November) drives restoration demand. Drought impacts landscaping. Earthquake retrofitting is ongoing market.
DBPR (Dept of Business and Professional Regulation)licensing
Hurricane season June-November creates massive restoration demand. Snowbird season November-March boosts service volume 30-40%. Year-round construction. Pool service is year-round industry. Pest control peaks in summer humidity.
Harsh winters in upstate, moderate in NYC. Construction limited in winter upstate. NYC market is enormous but hypercompetitive. Brownstone/pre-war building maintenance is specialized trade. NYC licensing is notoriously complex.
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
What grading contractors actually deal with
Hitting precise slope and drainage specs - a pad or driveway has to fall the right percentage to drain, and being off a fraction means water ponds, a slab cracks, or the engineer rejects the as-built
Soil moisture and compaction - grading wet clay or failing to compact in lifts means the fill settles later and the customer blames the finished surface that looked perfect on day one
Erosion-control and stormwater (SWPPP) compliance - silt fence, inlet protection, and stabilization the inspector checks, with stop-work orders and fines if the site sheds mud into a storm drain
Balancing cut and fill across a site - misjudging the earthwork quantities means importing or hauling dirt that wasn't in the bid, and grade-tolerance disputes when the surveyor's as-built doesn't match
A day in the life of a grading contractor
I walk the site first with the plans and the grade stakes, checking the surveyor's hubs against the design because everything I do today is chasing tenths of a foot. The job is a building pad and a driveway that has to drain to the street. I fire up the grade-control system, and the GPS keeps the blade on the design surface as I make passes - but the subgrade clay is wet from last night, so I'm spreading and letting it dry before I compact, because rolling wet clay just pumps and fails later. Mid-morning the erosion inspector swings by; my silt fence is trenched in and the inlet protection's good, so no stop-work, but I've seen jobs shut down over a torn fence. I cut the high side, move the spoil to fill the low corner - keeping cut and fill balanced so I'm not trucking dirt I didn't bid. Afternoon is fine grade: box blade passes until the pad is flat to tolerance and the driveway falls a clean two percent to the gutter. I roll it in lifts, proof it, and shoot grades across the pad to prove it drains and meets spec for the as-built. Last hour is photographing the finished grades, marking the lifts I compacted for the inspector, invoicing for the dirt actually moved, and confirming tomorrow's site has the stakes set and access for the lowboy.
The tools a working grading contractor actually owns
Motor grader or a box blade on a tractor
GPS or laser grade-control system
Compact track loader with a grading attachment
Smooth-drum roller and plate compactor
Builder's level and grade stakes
Skid steer with a laser-guided box for fine grade
Local grading contractors on Nexa
Real grading contractors near you who run their business on Nexa — book directly, no platform fee.
Are you a grading contractor? Post your business and get found in your area — $2.99 one-time.
Or browse every grading contractor on Nexa →
The kit a working grading contractor owns
The tools of the trade — each a one-time buy that earns its keep for years.
Core kitEssential
Compact track loader with grading attachment
$40,000–$120,000
Core kitEssential
GPS or laser grade-control system
$15,000–$80,000
Core kitEssential
Box blade and land plane for a tractor
$800–$4,000
Core kitEssential
Smooth-drum roller
$8,000–$50,000
Core kitEssential
Plate compactor
$800–$4,000
Core kitEssential
Builder's level and grade stakes
$200–$900
Core kitEssential
Laser-guided grading box
$8,000–$30,000
Core kitEssential
Lowboy or equipment trailer
$8,000–$40,000
Upgrade
Motor grader
$80,000–$350,000
The core kit, bought once$80,800–$328,900
Here's the bar that matters: you spent $80,800–$328,900 on tools that last for years, and never thought twice. So why should the software cost more than your whole kit — every single year? Hold it to the same standard as a good tool: $279, once.
Where Nexa wins for a grading contractor — and where it doesn't
The honest version. Nexa was built to beat the rented stack on the jobs that matter most to a grading contractor — here's where it wins, where the integration wins it anyway, and the things it genuinely doesn't do, with who to use instead. (No tool is best at everything; a guide that pretends otherwise is just an ad.)
Compare the essential business tools for grading contractors
The usual subscriptions vs. Nexa, side by side. Drag the time slider — every year you keep renting, the gap widens. Nexa is $279, one time.
The jobThe usual rentalThe verdict
The whole connected stack3 subscriptions · ~$1,044/yrNexa wins big One tool, $279 once — Nexa carries one site from the grade-stake check through the drainage cut and erosion controls to the invoice and the books as one record, so the hubs that fought the plan never have to be re-typed between separate apps. without re-typing. That handoff is the part separate tools can't buy at any price.
Job & project trackingJobber →Nexa wins When you check the surveyor's hubs and the elevations are off enough that grading to them would pond water or crack a slab, that catch lands on the same job, so the corrected grade and the lift compaction that prevents later settling are on record where a scheduler alone could never hold the SWPPP erosion controls the inspector checks.
InvoicingFreshBooks →Nexa wins The pad and driveway you graded to the right fall, plus the silt fence and inlet protection, flow off the job into the invoice, so work chasing tenths of a foot bills exactly as done without re-keying it into separate billing software.
Books & accountingQuickBooks →Nexa wins Because every grade correction, compaction lift, and stabilization measure rides the same record into the books, your real margin on a pad that has to drain to the street is right there without re-entering anything from a billing app.
If you run real payroll for a team—Not Nexa Use Gusto → — it's better at that, and we'd rather tell you than pretend.
If you run big email campaigns & automations—Not Nexa Use ConvertKit → — it's better at that, and we'd rather tell you than pretend.
Prefer to own a piece outright instead of renting? Free and open-source tools (GnuCash, Invoice Ninja and the like) each handle one job if you'll self-host them — a real option, listed because it's true.
These are affiliate links — if you sign up through one, we may earn a commission at no extra cost to you. We list them because they're the honest best pick for the job, Nexa included. As an Amazon Associate we earn from qualifying purchases. Competitor pricing verified 2026-06-12.
How To Read This Page
We make Nexa. It is one of the two options compared here, so read this with that in mind. We have tried to make Jobber's case the way we would want ours made — their strengths above are their own published feature list, not our summary of it.
The prices are Jobber's published list prices, checked on the date shown in the sources below. Plans change; check theirs before you decide.
No customer quotes appear on this page because we do not have any from grading contractors we can verify. For user testimony, read the independent reviews — Jobber on G2 and on Capterra — where the reviewers are not selling you anything.
Some links on this page earn us money. Tool links may be affiliate links paying us a commission at no extra cost to you, including links to Jobber itself. We list a tool when it is the honest pick for the job, not because of the payout.
Check the price yourself:Jobber's own pricing page is the source for every figure above, read on the date shown in the sources section below.
We are not neutral about subscriptions, and that is the argument, not a hidden assumption: software you pay for once is cheaper over three years than software you rent, unless you need something only the rented one does.
How we put this guide together
We build a grading contractor's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for a grading contractor — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.
Where the numbers come from
Vendor pricingJobber $588/yr, Housecall Pro $948/yr, QuickBooks $456/yr, Square — taken from each company's published plans, last verified September 2026. Pricing moves; each name above links straight to that vendor’s own pricing page so you can confirm it before you decide.
Income contextThe $55,000 median we cite for the typical grading contractor is occupational median annual pay from the U.S. Bureau of Labor Statistics (Occupational Employment & Wage Statistics), compiled April 2026. We use it only to show software spend as a share of real income — your own numbers will differ.
Three-year mathMulti-year totals are today's list price multiplied by the number of years. No price rise is projected, so the figure can be checked against the vendor's own pricing page; if they raise it, the real cost is higher.
Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.
FAQ
Is Nexa really a Jobber replacement?
For solo grading contractors and small teams, yes. invoicing, scheduling, CRM, time tracking, task management, and full accounting — all for $279 once. Jobber may be better if you have a large team (10+) or need enterprise-specific features.
What does Jobber do that Nexa doesn't?
Jobber has features like Built for home services and Mobile app for field teams that some businesses rely on. For most solo grading contractors, these aren't dealbreakers.
How fast does Nexa pay for itself?
At $49/month, Nexa pays for itself in 5.7 months. After that: $588 saved every year.
Can I pay in installments?
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.