Jobber vs Nexa The Real Comparison for Custom Exhaust Shops
Jobber
$49/mo ($588/yr)
VS
Nexa
$279 once — own forever
or 3 payments of $99
Break even: 5.7 months at Jobber's current price.
Bottom Line
Jobber costs custom exhaust shops $588/year at today's list price. Nexa is $279 once for invoicing, scheduling, CRM, time tracking and accounting in one suite — so it pays for itself in 5.7 months and you own it after that. What it is not: hosted-for-you software with a support desk and a roadmap you can lobby. That is the trade, and the rest of this page is the detail behind it.
The verdict for custom exhaust shops: Jobber is solid software, but at $49/month it costs $1,764 over 3 years. Nexa does most of what Jobber does for $279 once. For solo custom exhaust shops and small teams, Nexa is the better deal.
Choose Nexa if:
You're done paying monthly forever
You're a solo operator or small team (1-5)
You need Invoicing, time-tracker, task-manager in one purchase in one tool
You're tired of price increases
You want to own your tools like you own your equipment
Choose Jobber if:
You have a large team (10+) needing enterprise features
You're deeply invested in Jobber's specific workflow
You need a feature Nexa doesn't have yet
What Jobber Actually Costs Custom Exhaust Shops
Today's list price is $49/month — $588 a year, from Jobber's own pricing page. Every figure below is that price, multiplied. Nothing is projected.
Three years at today's price
Year 1$588
Year 2$588
Year 3$588
Three years of Jobber$1,764
Nexa: $279 once (or 3 × $99). Over the same three years, that is $1,485 less.
If Jobber raises its price, the three-year cost goes up; if it cuts it, the cost comes down. We don't guess which. Add-ons, extra seats and card-processing fees are not included, on either side.
Feature-by-Feature
Feature
Jobber
Nexa
Invoicing
—
✓
Scheduling
—
✓
CRM
—
✓
Time Tracking
—
✓
Full Accounting
—
✓ (SIMPL)
Task Management
—
✓
Works offline
—
✓
Price
$49/mo
$279 once or 3 × $99
3-Year Total
$1,764
$279
You own it?
No — stop paying, lose access
Yes — forever
✓ and ✗ for Jobber come from its own published feature list. — means the feature isn't in that list, which is not the same as Jobber lacking it: check with them. Three years is at today's price.
What "$279 Once" Does And Doesn't Buy
It buys the software, not a service contract. You install Nexa and it runs on your machine. There is no seat count, and nothing stops working if you stop paying, because there is nothing to stop paying.
Jobber's monthly fee is not only rent. It pays for their hosting, their support desk, and their engineers shipping changes every week. If those matter to how you work, that is a real thing you would be giving up.
Cross-device sync is the one optional extra — $4.99/month if you want your data mirrored between machines. Skip it and Nexa still works; you just sync manually.
The honest risk of buying once: you are betting on us still being here to improve it. The honest risk of renting: the price is theirs to raise, and the graveyard section below is a record of tools that did exactly that.
What Jobber Does Better
Straight from Jobber's own feature set. If one of these is the reason you pay them, that reason does not disappear because Nexa is cheaper.
Built for home services
Mobile app for field teams
Route optimization
Client hub for self-service
QuickBooks Online integration
A smaller bill up front: plans start at $49/month, against $279 paid once for Nexa.
Jobber is the better call if you need built for home services specifically, or if your team is large enough that per-seat pricing still beats buying software outright.
Where business tools fit — for a custom exhaust fabricator
Software doesn't do the actual work — it automates the business around it. And that part is the same for every custom exhaust fabricator: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.
1
Find the work
Win the job
↓
A lead, a call, a referral — and a quote or estimate that turns it into a booked job.
CRM / contacts
Estimates & proposals
Booking / scheduling
then ↓
2
Manage the work
Do the job
↓
The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.
Job / project tracking
Time tracking
Expenses, materials & add-ons
then ↓
3
Bill for it
Send the bill
↓
The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.
Invoicing
Deposits & credits
then ↓
4
Get paid
Collect payment
↓
Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.
Card / online payments
Automatic reminders
You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)
Calculate Your Full Stack
Jobber plus whatever else you're paying for:
Email yourself this comparison?
Switching from Jobber
1
Export your data — Go to Settings → Data Export. Download clients, jobs, and invoices as CSV.
2
Set up Nexa — 15-minute setup. Import your client list and job categories.
3
Parallel run — Run both for 1-2 weeks to verify scheduled jobs transfer cleanly.
4
Cancel Jobber — Cancel subscription before your next billing cycle. Download final export.
✓ 30-day money-back guarantee. Zero risk.
Sound Familiar?
A custom exhaust shop builds, it does not just bolt on. A car goes up on the lift and the job is read from underneath: where the stock system runs, where the obstacles are, where the customer wants the tips to exit. The craft is in the mandrel bender and the welder. Lengths of stainless or aluminized tube get measured, marked, and bent to clear the subframe and the rear axle without kinking, then tacked together piece by piece under the car, checking clearance to the floor pan and the heat shields as it goes. Once the geometry is right, it comes down for final TIG or MIG welding, the mufflers and resonators chosen as much for sound as for flow. Then it goes back up, gets hung on rubber isolators so it does not rattle, and finally the moment of truth: starting the car and listening. Sound is the whole point and the whole problem, because 'aggressive but not droney' means something different to every customer, and a system that sounds great at idle can drone miserably at 70 mph. The recurring frictions are pricing a one-off build with no catalog number, managing the subjective sound expectation, and handling the customer who shows up with aftermarket headers or a turbo that changes everything about the fit. Underneath is the regulatory line on emissions and noise that the shop has to walk carefully.
Custom systems are bent and welded to fit the specific car on the lift, so there is no parts-lookup price and every job is a one-off estimate built from tube footage, bends, and labor
Customers want a specific sound and 'not too droney,' which is subjective, so a finished system that booms on the highway becomes an argument and a rework even though it was built to spec
Cars come in mid-modification with headers or turbos the customer added, and discovering clearance and fitment surprises on the lift blows the time estimate
Emissions and noise regulations vary, so deleting a catalytic converter or going too loud is a liability the shop has to navigate against what the customer is demanding
Invoicing, time tracking, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
None of that is a software problem you can buy your way out of in one click — it is why the tool you pick matters more than what it costs. Jobber solves some of it. So does Nexa. The difference is what you are left holding in three years.
What This Means for Custom Exhaust Shops
The median Custom Exhaust Fabricator earns $48,000/year. At $588/year, Jobber is a recurring slice of that — paid again every year, whether the year was good or not. Owning the same jobs outright is $279 once, and the slice stops.
Nexa is $279 once. Invoicing, scheduling, CRM, time tracking, accounting — all connected, built for custom exhaust shops. You own it like you own your Mandrel tube bender for kink-free pipe radii.
Is Nexa actually right for a custom exhaust fabricator?
An honest fit check — because the wrong tool is worse than no tool.
Right for you if
You run solo or a small crew — like the 12,000 custom exhaust shops in the US who do, and you wear every hat.
You're tired of paying every month for a monthly subscription stack and a pile of apps that don't talk to each other.
You want to invoice, schedule, and track from the field — not from a back office.
You'd rather own your software once, the way you own your Mandrel tube bender for kink-free pipe radii.
Look elsewhere if
You run a 20+ custom exhaust fabricator fleet that needs enterprise dispatch and multi-crew routing — Nexa is built for 1–5, and a fleet platform will serve you better.
You need full payroll for a large team or deep, SKU-level inventory — that's not what Nexa is for.
You're genuinely happy paying monthly and don't mind stitching tools together. No tool fixes a workflow you already like.
The honest fit: if you're a solo or small custom exhaust shops business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling past a handful of crews, a fleet platform may fit better — and we'd rather tell you that now than sell you the wrong thing.
Invoicing, time tracking, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
What custom exhaust shops actually deal with
Custom systems are bent and welded to fit the specific car on the lift, so there is no parts-lookup price and every job is a one-off estimate built from tube footage, bends, and labor
Customers want a specific sound and 'not too droney,' which is subjective, so a finished system that booms on the highway becomes an argument and a rework even though it was built to spec
Cars come in mid-modification with headers or turbos the customer added, and discovering clearance and fitment surprises on the lift blows the time estimate
Emissions and noise regulations vary, so deleting a catalytic converter or going too loud is a liability the shop has to navigate against what the customer is demanding
A day in the life of a custom exhaust fabricator
A custom exhaust shop builds, it does not just bolt on. A car goes up on the lift and the job is read from underneath: where the stock system runs, where the obstacles are, where the customer wants the tips to exit. The craft is in the mandrel bender and the welder. Lengths of stainless or aluminized tube get measured, marked, and bent to clear the subframe and the rear axle without kinking, then tacked together piece by piece under the car, checking clearance to the floor pan and the heat shields as it goes. Once the geometry is right, it comes down for final TIG or MIG welding, the mufflers and resonators chosen as much for sound as for flow. Then it goes back up, gets hung on rubber isolators so it does not rattle, and finally the moment of truth: starting the car and listening. Sound is the whole point and the whole problem, because 'aggressive but not droney' means something different to every customer, and a system that sounds great at idle can drone miserably at 70 mph. The recurring frictions are pricing a one-off build with no catalog number, managing the subjective sound expectation, and handling the customer who shows up with aftermarket headers or a turbo that changes everything about the fit. Underneath is the regulatory line on emissions and noise that the shop has to walk carefully.
The tools a working custom exhaust fabricator actually owns
Mandrel tube bender for kink-free pipe radii
TIG and MIG welders for stainless and aluminized tube
Two-post lift and exhaust hangers for under-car work
Cutoff saw, chop saw, and a deburring setup
Mufflers, resonators, and tips in stock on the wall
The tools of the trade — each a one-time buy that earns its keep for years.
Core kitEssential
Mandrel tube bender
$3,000–$20,000
Core kitEssential
TIG welder
$700–$3,000
Core kitEssential
MIG welder
$500–$2,000
Core kitEssential
Chop saw and band saw
$300–$1,500
Core kitEssential
Angle grinders and flap discs
$60–$300
Core kitEssential
Two-post lift
$3,000–$8,000
Core kitEssential
Welding table and clamps
$300–$1,500
Upgrade
Exhaust hanger and alignment jigs
$40–$200
The core kit, bought once$7,860–$36,300
Here's the bar that matters: you spent $7,860–$36,300 on tools that last for years, and never thought twice. So why should the software cost more than your whole kit — every single year? Hold it to the same standard as a good tool: $279, once.
Where Nexa wins for a custom exhaust fabricator — and where it doesn't
The honest version. Nexa was built to beat the rented stack on the jobs that matter most to a custom exhaust fabricator — here's where it wins, where the integration wins it anyway, and the things it genuinely doesn't do, with who to use instead. (No tool is best at everything; a guide that pretends otherwise is just an ad.)
Compare the essential business tools for custom exhaust shops
The usual subscriptions vs. Nexa, side by side. Drag the time slider — every year you keep renting, the gap widens. Nexa is $279, one time.
The jobThe usual rentalThe verdict
The whole connected stack3 subscriptions · ~$1,044/yrNexa wins big One tool, $279 once — From reading the car on the lift through the mandrel bends to the finished system and the books, each build flows through one record, so when a customer calls it too droney the spec you built to and the charge are in one place. without re-typing. That handoff is the part separate tools can't buy at any price.
InvoicingFreshBooks →Nexa wins Because there is no part number to look up and every system is a one-off, Nexa builds the bill from the footage and bends actually on the job record, so the estimate and the finished welded system match.
Job & project trackingJobber →Nexa wins You build from underneath with a mandrel bender, not a parts lookup, and Nexa holds the tube footage, the bends, and the labor on one record so a one-off cat-back for a car nobody makes a kit for is tracked instead of estimated in your head.
Books & accountingQuickBooks →Nexa wins Tube, hangers, and welding labor post from the job record into your books, so a custom build's real cost lands without re-keying, even when a header or turbo the customer added on the lift blew the time.
If you run real payroll for a team—Not Nexa Use Gusto → — it's better at that, and we'd rather tell you than pretend.
If you run big email campaigns & automations—Not Nexa Use ConvertKit → — it's better at that, and we'd rather tell you than pretend.
Prefer to own a piece outright instead of renting? Free and open-source tools (GnuCash, Invoice Ninja and the like) each handle one job if you'll self-host them — a real option, listed because it's true.
These are affiliate links — if you sign up through one, we may earn a commission at no extra cost to you. We list them because they're the honest best pick for the job, Nexa included. As an Amazon Associate we earn from qualifying purchases. Competitor pricing verified 2026-06-12.
How To Read This Page
We make Nexa. It is one of the two options compared here, so read this with that in mind. We have tried to make Jobber's case the way we would want ours made — their strengths above are their own published feature list, not our summary of it.
The prices are Jobber's published list prices, checked on the date shown in the sources below. Plans change; check theirs before you decide.
No customer quotes appear on this page because we do not have any from custom exhaust shops we can verify. For user testimony, read the independent reviews — Jobber on G2 and on Capterra — where the reviewers are not selling you anything.
Some links on this page earn us money. Tool links may be affiliate links paying us a commission at no extra cost to you, including links to Jobber itself. We list a tool when it is the honest pick for the job, not because of the payout.
Check the price yourself:Jobber's own pricing page is the source for every figure above, read on the date shown in the sources section below.
We are not neutral about subscriptions, and that is the argument, not a hidden assumption: software you pay for once is cheaper over three years than software you rent, unless you need something only the rented one does.
How we put this guide together
We build a custom exhaust fabricator's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for a custom exhaust fabricator — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.
Where the numbers come from
Vendor pricingQuickBooks $456/yr, Jobber $588/yr, Square, FreshBooks $516/yr — taken from each company's published plans, last verified September 2026. Pricing moves; each name above links straight to that vendor’s own pricing page so you can confirm it before you decide.
Income contextThe $48,000 median we cite for the typical custom exhaust fabricator is occupational median annual pay from the U.S. Bureau of Labor Statistics (Occupational Employment & Wage Statistics), compiled April 2026. We use it only to show software spend as a share of real income — your own numbers will differ.
Three-year mathMulti-year totals are today's list price multiplied by the number of years. No price rise is projected, so the figure can be checked against the vendor's own pricing page; if they raise it, the real cost is higher.
Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.
FAQ
Is Nexa really a Jobber replacement?
For solo custom exhaust shops and small teams, yes. invoicing, scheduling, CRM, time tracking, task management, and full accounting — all for $279 once. Jobber may be better if you have a large team (10+) or need enterprise-specific features.
What does Jobber do that Nexa doesn't?
Jobber has features like Built for home services and Mobile app for field teams that some businesses rely on. For most solo custom exhaust shops, these aren't dealbreakers.
How fast does Nexa pay for itself?
At $49/month, Nexa pays for itself in 5.7 months. After that: $588 saved every year.
Can I pay in installments?
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.