Jobber costs ceramic coating specialists $588/year at today's list price. Nexa is $279 once for invoicing, scheduling, CRM, time tracking and accounting in one suite — so it pays for itself in 5.7 months and you own it after that. What it is not: hosted-for-you software with a support desk and a roadmap you can lobby. That is the trade, and the rest of this page is the detail behind it.
The verdict for ceramic coating specialists: Jobber is solid software, but at $49/month it costs $1,764 over 3 years. Nexa does most of what Jobber does for $279 once. For solo ceramic coating specialists and small teams, Nexa is the better deal.
Today's list price is $49/month — $588 a year, from Jobber's own pricing page. Every figure below is that price, multiplied. Nothing is projected.
Nexa: $279 once (or 3 × $99). Over the same three years, that is $1,485 less.
If Jobber raises its price, the three-year cost goes up; if it cuts it, the cost comes down. We don't guess which. Add-ons, extra seats and card-processing fees are not included, on either side.
| Feature | Jobber | Nexa |
|---|---|---|
| Invoicing | — | ✓ |
| Scheduling | — | ✓ |
| CRM | — | ✓ |
| Time Tracking | — | ✓ |
| Full Accounting | — | ✓ (SIMPL) |
| Task Management | — | ✓ |
| Works offline | — | ✓ |
| Price | $49/mo | $279 once or 3 × $99 |
| 3-Year Total | $1,764 | $279 |
| You own it? | No — stop paying, lose access | Yes — forever |
✓ and ✗ for Jobber come from its own published feature list. — means the feature isn't in that list, which is not the same as Jobber lacking it: check with them. Three years is at today's price.
Straight from Jobber's own feature set. If one of these is the reason you pay them, that reason does not disappear because Nexa is cheaper.
Jobber is the better call if you need built for home services specifically, or if your team is large enough that per-seat pricing still beats buying software outright.
Software doesn't do the actual work — it automates the business around it. And that part is the same for every ceramic coating specialist: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.
A lead, a call, a referral — and a quote or estimate that turns it into a booked job.
The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.
The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.
Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.
You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)
Jobber plus whatever else you're paying for:
Email yourself this comparison?
Invoicing, time tracking, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
None of that is a software problem you can buy your way out of in one click — it is why the tool you pick matters more than what it costs. Jobber solves some of it. So does Nexa. The difference is what you are left holding in three years.
The median Ceramic Coating Specialist earns $48,000/year. At $588/year, Jobber is a recurring slice of that — paid again every year, whether the year was good or not. Owning the same jobs outright is $279 once, and the slice stops.
Nexa is $279 once. Invoicing, scheduling, CRM, time tracking, accounting — all connected, built for ceramic coating specialists. You own it like you own your Dual-action and rotary polishers with a graded pad collection.
An honest fit check — because the wrong tool is worse than no tool.
The honest fit: if you're a solo or small ceramic coating specialists business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling past a handful of crews, a fleet platform may fit better — and we'd rather tell you that now than sell you the wrong thing.
Invoicing, time tracking, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
The bay is the whole world for a coating specialist, because dust is the enemy and the work happens under controlled light. A typical car arrives and the real job is the inspection: paint depth readings, swirl-finder light raking across every panel to map the defects, and an honest conversation with the owner that the gloss they want comes from correction, not from the coating itself. Most of the actual hours are polishing, stage after stage, chasing swirls and scratches out of clear coat with the right pad and compound, wiping down with panel prep, and re-inspecting under the lights to confirm the correction held. Only then does the coating go on, panel by panel, applied with a suede block and leveled in a tight window before it flashes. Then the car sits to cure, which means the bay is occupied and the schedule has to respect that. Between the hands-on work there is the customer side: explaining why this is a multi-day commitment, setting the maintenance-wash expectations that keep the warranty valid, and following up months later for the annual inspection the warranty requires. The frustration is almost always the gap between what a customer imagined and what the paint actually needs, and that gap is best closed before the deposit, not after the car is on the lift.
Real ceramic coating specialists near you who run their business on Nexa — book directly, no platform fee. Are you a ceramic coating specialist? Post your business and get found in your area — $2.99 one-time. Or browse every ceramic coating specialist on Nexa →
The tools of the trade — each a one-time buy that earns its keep for years.
Here's the bar that matters: you spent $650–$2,890 on tools that last for years, and never thought twice. So why should the software cost more than your whole kit — every single year? Hold it to the same standard as a good tool: $279, once.
The honest version. Nexa was built to beat the rented stack on the jobs that matter most to a ceramic coating specialist — here's where it wins, where the integration wins it anyway, and the things it genuinely doesn't do, with who to use instead. (No tool is best at everything; a guide that pretends otherwise is just an ad.)
The usual subscriptions vs. Nexa, side by side. Drag the time slider — every year you keep renting, the gap widens. Nexa is $279, one time.
On the work a ceramic coating specialist actually lives in — invoicing, job & project tracking and books & accounting — Nexa holds its own against the usual rentals (FreshBooks →, Jobber →, QuickBooks →). Head-to-head on any single one it's competitive; what tips it is the thing none of them can copy: From the swirl-finder inspection through paint correction to the cured coating to the books, each car lives on one record so the multi-year warranty and its annual maintenance-wash inspection stay attached to the customer you billed. in one record, no re-typing between four apps. One tool, $279 once, against 3 subscriptions · ~$1,044/yr. Concretely: on invoicing, When the photo lied and the paint under your lights is far worse than the three phone shots showed, the revised correction scope is already in the job record, so the bill matches the real work instead of the shocked-customer phone quote.
Where it's not the answer: if you run real payroll for a team (use Gusto →), or run big email campaigns & automations (use ConvertKit →). Those tools are better at their one thing, and we'd rather point you to them than pretend.
Prefer to own a piece outright instead of renting? Free and open-source tools (GnuCash, Invoice Ninja and the like) each handle one job if you'll self-host them — a real option, listed because it's true.
These are affiliate links — if you sign up through one, we may earn a commission at no extra cost to you. We list them because they're the honest best pick for the job, Nexa included. As an Amazon Associate we earn from qualifying purchases. Competitor pricing verified 2026-06-12.
We build a ceramic coating specialist's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for a ceramic coating specialist — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.
Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.
For solo ceramic coating specialists and small teams, yes. invoicing, scheduling, CRM, time tracking, task management, and full accounting — all for $279 once. Jobber may be better if you have a large team (10+) or need enterprise-specific features.
Jobber has features like Built for home services and Mobile app for field teams that some businesses rely on. For most solo ceramic coating specialists, these aren't dealbreakers.
At $49/month, Nexa pays for itself in 5.7 months. After that: $588 saved every year.
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.
Own your tools. Stop renting your software.
Get Nexa — $279 Once