Jobber vs Nexa The Real Comparison for Automatic Gate Repair
Jobber
$49/mo ($588/yr)
VS
Nexa
$279 once — own forever
or 3 payments of $99
Break even: 5.7 months at Jobber's current price.
Bottom Line
Jobber costs automatic gate repair $588/year at today's list price. Nexa is $279 once for invoicing, scheduling, CRM, time tracking and accounting in one suite — so it pays for itself in 5.7 months and you own it after that. What it is not: hosted-for-you software with a support desk and a roadmap you can lobby. That is the trade, and the rest of this page is the detail behind it.
The verdict for automatic gate repair: Jobber is solid software, but at $49/month it costs $1,764 over 3 years. Nexa does most of what Jobber does for $279 once. For solo automatic gate repair and small teams, Nexa is the better deal.
Choose Nexa if:
You're done paying monthly forever
You're a solo operator or small team (1-5)
You need time-tracker, Invoicing, task-manager in one purchase in one tool
You're tired of price increases
You want to own your tools like you own your equipment
Choose Jobber if:
You have a large team (10+) needing enterprise features
You're deeply invested in Jobber's specific workflow
You need a feature Nexa doesn't have yet
What Jobber Actually Costs Automatic Gate Repair
Today's list price is $49/month — $588 a year, from Jobber's own pricing page. Every figure below is that price, multiplied. Nothing is projected.
Three years at today's price
Year 1$588
Year 2$588
Year 3$588
Three years of Jobber$1,764
Nexa: $279 once (or 3 × $99). Over the same three years, that is $1,485 less.
If Jobber raises its price, the three-year cost goes up; if it cuts it, the cost comes down. We don't guess which. Add-ons, extra seats and card-processing fees are not included, on either side.
Feature-by-Feature
Feature
Jobber
Nexa
Invoicing
—
✓
Scheduling
—
✓
CRM
—
✓
Time Tracking
—
✓
Full Accounting
—
✓ (SIMPL)
Task Management
—
✓
Works offline
—
✓
Price
$49/mo
$279 once or 3 × $99
3-Year Total
$1,764
$279
You own it?
No — stop paying, lose access
Yes — forever
✓ and ✗ for Jobber come from its own published feature list. — means the feature isn't in that list, which is not the same as Jobber lacking it: check with them. Three years is at today's price.
What "$279 Once" Does And Doesn't Buy
It buys the software, not a service contract. You install Nexa and it runs on your machine. There is no seat count, and nothing stops working if you stop paying, because there is nothing to stop paying.
Jobber's monthly fee is not only rent. It pays for their hosting, their support desk, and their engineers shipping changes every week. If those matter to how you work, that is a real thing you would be giving up.
Cross-device sync is the one optional extra — $4.99/month if you want your data mirrored between machines. Skip it and Nexa still works; you just sync manually.
The honest risk of buying once: you are betting on us still being here to improve it. The honest risk of renting: the price is theirs to raise, and the graveyard section below is a record of tools that did exactly that.
What Jobber Does Better
Straight from Jobber's own feature set. If one of these is the reason you pay them, that reason does not disappear because Nexa is cheaper.
Built for home services
Mobile app for field teams
Route optimization
Client hub for self-service
QuickBooks Online integration
A smaller bill up front: plans start at $49/month, against $279 paid once for Nexa.
Jobber is the better call if you need built for home services specifically, or if your team is large enough that per-seat pricing still beats buying software outright.
Where business tools fit — for an automatic gate technician
Software doesn't do the actual work — it automates the business around it. And that part is the same for every automatic gate technician: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.
1
Find the work
Win the job
↓
A lead, a call, a referral — and a quote or estimate that turns it into a booked job.
CRM / contacts
Estimates & proposals
Booking / scheduling
then ↓
2
Manage the work
Do the job
↓
The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.
Job / project tracking
Time tracking
Expenses, materials & add-ons
then ↓
3
Bill for it
Send the bill
↓
The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.
Invoicing
Deposits & credits
then ↓
4
Get paid
Collect payment
↓
Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.
Card / online payments
Automatic reminders
You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)
Calculate Your Full Stack
Jobber plus whatever else you're paying for:
Email yourself this comparison?
Switching from Jobber
1
Export your data — Go to Settings → Data Export. Download clients, jobs, and invoices as CSV.
2
Set up Nexa — 15-minute setup. Import your client list and job categories.
3
Parallel run — Run both for 1-2 weeks to verify scheduled jobs transfer cleanly.
4
Cancel Jobber — Cancel subscription before your next billing cycle. Download final export.
✓ 30-day money-back guarantee. Zero risk.
Sound Familiar?
First call is an apartment complex gate that residents say sticks open at night, the kind of intermittent fault that's already swinging fine when he pulls up. He puts the multimeter on the operator circuit, wiggles connections, checks the photo-eyes, and watches the board for fault codes, because a problem that won't reproduce is the hardest money he makes. He finds a loose neutral that probably drops the board when the transformer warms up, and that's the kind of thing that would've cost a parts-swapper three visits. Next is a gate that slammed on a car, which means before anything else he's checking UL 325 compliance, the photo-eyes and the safety edge, because the last tech apparently jumpered out a sensor to stop a nuisance trip and left a gate that can crush. He won't sign off on a gate that doesn't reverse on an obstruction. Afternoon is a commercial slide gate dead in the water, and the culprit is a buried loop wire a landscaper's edger sliced; he traces the break, splices it weatherproof, and reseals it. Throughout the day he's explaining to customers why he can't quote a flat 'fix it' price over the phone, because the same symptom could be a cheap sensor or a whole new operator, and he won't know until he meters it.
Intermittent faults are the worst calls: the gate works fine when you arrive and fails for the customer at 6 PM, so diagnosing a board, a loop, or a sensor without the failure happening in front of you eats hours
UL 325 safety entrapment compliance means a repair can't just make the gate move again, it has to make it stop on an obstruction, and a sensor bypassed by a previous hack is a liability you inherit
Buried loop wires get cut by landscapers or crack with the pavement, and tracing a break in a wire under concrete is slow, dirty work the customer doesn't see
Customers expect a flat 'fix the gate' price, but the cause could be a $40 sensor or a $900 operator, and they hear the estimate as a bait-and-switch
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
None of that is a software problem you can buy your way out of in one click — it is why the tool you pick matters more than what it costs. Jobber solves some of it. So does Nexa. The difference is what you are left holding in three years.
What This Means for Automatic Gate Repair
The median automatic gate technician earns $55,000/year. At $588/year, Jobber is a recurring slice of that — paid again every year, whether the year was good or not. Owning the same jobs outright is $279 once, and the slice stops.
Nexa is $279 once. Invoicing, scheduling, CRM, time tracking, accounting — all connected, built for automatic gate repair. You own it like you own your Multimeter and clamp meter for the operator circuit.
Is Nexa actually right for an automatic gate technician?
An honest fit check — because the wrong tool is worse than no tool.
Right for you if
You run solo or a small crew — like the 15,000 automatic gate repair in the US who do, and you wear every hat.
You're tired of paying every month for a monthly subscription stack and a pile of apps that don't talk to each other.
You want to invoice, schedule, and track from the field — not from a back office.
You'd rather own your software once, the way you own your Multimeter and clamp meter for the operator circuit.
Look elsewhere if
You run a 20+ automatic gate technician fleet that needs enterprise dispatch and multi-crew routing — Nexa is built for 1–5, and a fleet platform will serve you better.
You need full payroll for a large team or deep, SKU-level inventory — that's not what Nexa is for.
You're genuinely happy paying monthly and don't mind stitching tools together. No tool fixes a workflow you already like.
The honest fit: if you're a solo or small automatic gate repair business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling past a handful of crews, a fleet platform may fit better — and we'd rather tell you that now than sell you the wrong thing.
Automatic Gate Repair by the numbers — by place
Tax, licensing & seasonality where you operate
1-13.3%income tax
CSLB (Contractors State License Board)licensing
Year-round construction in SoCal. Fire season (June-November) drives restoration demand. Drought impacts landscaping. Earthquake retrofitting is ongoing market.
DBPR (Dept of Business and Professional Regulation)licensing
Hurricane season June-November creates massive restoration demand. Snowbird season November-March boosts service volume 30-40%. Year-round construction. Pool service is year-round industry. Pest control peaks in summer humidity.
Harsh winters in upstate, moderate in NYC. Construction limited in winter upstate. NYC market is enormous but hypercompetitive. Brownstone/pre-war building maintenance is specialized trade. NYC licensing is notoriously complex.
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
What automatic gate repair actually deal with
Intermittent faults are the worst calls: the gate works fine when you arrive and fails for the customer at 6 PM, so diagnosing a board, a loop, or a sensor without the failure happening in front of you eats hours
UL 325 safety entrapment compliance means a repair can't just make the gate move again, it has to make it stop on an obstruction, and a sensor bypassed by a previous hack is a liability you inherit
Buried loop wires get cut by landscapers or crack with the pavement, and tracing a break in a wire under concrete is slow, dirty work the customer doesn't see
Customers expect a flat 'fix the gate' price, but the cause could be a $40 sensor or a $900 operator, and they hear the estimate as a bait-and-switch
A day in the life of a automatic gate technician
First call is an apartment complex gate that residents say sticks open at night, the kind of intermittent fault that's already swinging fine when he pulls up. He puts the multimeter on the operator circuit, wiggles connections, checks the photo-eyes, and watches the board for fault codes, because a problem that won't reproduce is the hardest money he makes. He finds a loose neutral that probably drops the board when the transformer warms up, and that's the kind of thing that would've cost a parts-swapper three visits. Next is a gate that slammed on a car, which means before anything else he's checking UL 325 compliance, the photo-eyes and the safety edge, because the last tech apparently jumpered out a sensor to stop a nuisance trip and left a gate that can crush. He won't sign off on a gate that doesn't reverse on an obstruction. Afternoon is a commercial slide gate dead in the water, and the culprit is a buried loop wire a landscaper's edger sliced; he traces the break, splices it weatherproof, and reseals it. Throughout the day he's explaining to customers why he can't quote a flat 'fix it' price over the phone, because the same symptom could be a cheap sensor or a whole new operator, and he won't know until he meters it.
The tools a working automatic gate technician actually owns
Multimeter and clamp meter for the operator circuit
The tools of the trade — each a one-time buy that earns its keep for years.
Core kitEssential
Multimeter and clamp meter
$60–$300
Core kitEssential
Gate operator programming remotes
$50–$300
Core kitEssential
Loop wire saw and sealant tools
$200–$900
Core kitEssential
Portable welder
$500–$2,000
Core kitEssential
Hammer drill and anchors
$150–$500
Core kitEssential
Conduit bender and fish tape
$40–$200
Core kitEssential
Post hole digger and concrete tools
$200–$700
Core kitEssential
Levels and laser
$80–$400
Upgrade
Hydraulic jack and gate lifting tools
$80–$400
Upgrade
Service van fitout
$500–$2,500
The core kit, bought once$1,280–$5,300
Here's the bar that matters: you spent $1,280–$5,300 on tools that last for years, and never thought twice. So why should the software cost more than your whole kit — every single year? Hold it to the same standard as a good tool: $279, once.
What Nexa does for an automatic gate technician — and what it doesn't
The honest version. Nexa was built to beat the rented stack on the jobs that matter most to an automatic gate technician — here's where it wins, where the integration wins it anyway, and the things it genuinely doesn't do, with who to use instead. (No tool is best at everything; a guide that pretends otherwise is just an ad.)
Compare the essential business tools for automatic gate repair
The usual subscriptions vs. Nexa, side by side. Drag the time slider — every year you keep renting, the gap widens. Nexa is $279, one time.
The reason it wins the set: From the intermittent-fault diagnosis to the compliance-restoring invoice to the books, one record carries each gate repair so hours chasing a board, a loop, or a sensor are never re-entered. in one record — $279 once vs 3 subscriptions · ~$1,044/yr.
What Nexa takes off your plate
Job & project trackingvs Jobber →The multimeter readings, photo-eye checks, and loop traces from an intermittent fault that cycled fine while you stood there all sit on one job record, so the next visit picks up exactly where the no-fault diagnosis left off.
Invoicingvs FreshBooks →When you find a sensor a previous hack bypassed and have to restore UL 325 entrapment compliance, that liability work flows from the job straight into the invoice without re-keying what you actually corrected.
Books & accountingvs QuickBooks →Because the hours you sink tracing a loop break under concrete flow from job to invoice to your books, the slow dirty work the customer never sees stops quietly disappearing from your margin.
When you run big email campaigns & automations→ ConvertKit →
Prefer to own a piece outright instead of renting? Free and open-source tools (GnuCash, Invoice Ninja and the like) each handle one job if you'll self-host them — a real option, listed because it's true.
These are affiliate links — if you sign up through one, we may earn a commission at no extra cost to you. We list them because they're the honest best pick for the job, Nexa included. As an Amazon Associate we earn from qualifying purchases. Competitor pricing verified 2026-06-12.
How To Read This Page
We make Nexa. It is one of the two options compared here, so read this with that in mind. We have tried to make Jobber's case the way we would want ours made — their strengths above are their own published feature list, not our summary of it.
The prices are Jobber's published list prices, checked on the date shown in the sources below. Plans change; check theirs before you decide.
No customer quotes appear on this page because we do not have any from automatic gate repair we can verify. For user testimony, read the independent reviews — Jobber on G2 and on Capterra — where the reviewers are not selling you anything.
Some links on this page earn us money. Tool links may be affiliate links paying us a commission at no extra cost to you, including links to Jobber itself. We list a tool when it is the honest pick for the job, not because of the payout.
Check the price yourself:Jobber's own pricing page is the source for every figure above, read on the date shown in the sources section below.
We are not neutral about subscriptions, and that is the argument, not a hidden assumption: software you pay for once is cheaper over three years than software you rent, unless you need something only the rented one does.
How we put this guide together
We build an automatic gate technician's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for an automatic gate technician — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.
Where the numbers come from
Vendor pricingJobber $588/yr, Housecall Pro $948/yr, QuickBooks $456/yr, Square — taken from each company's published plans, last verified September 2026. Pricing moves; each name above links straight to that vendor’s own pricing page so you can confirm it before you decide.
Income contextThe $55,000 median we cite for the typical automatic gate technician is occupational median annual pay from the U.S. Bureau of Labor Statistics (Occupational Employment & Wage Statistics), compiled April 2026. We use it only to show software spend as a share of real income — your own numbers will differ.
Three-year mathMulti-year totals are today's list price multiplied by the number of years. No price rise is projected, so the figure can be checked against the vendor's own pricing page; if they raise it, the real cost is higher.
Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.
FAQ
Is Nexa really a Jobber replacement?
For solo automatic gate repair and small teams, yes. invoicing, scheduling, CRM, time tracking, task management, and full accounting — all for $279 once. Jobber may be better if you have a large team (10+) or need enterprise-specific features.
What does Jobber do that Nexa doesn't?
Jobber has features like Built for home services and Mobile app for field teams that some businesses rely on. For most solo automatic gate repair, these aren't dealbreakers.
How fast does Nexa pay for itself?
At $49/month, Nexa pays for itself in 5.7 months. After that: $588 saved every year.
Can I pay in installments?
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.