Housecall Pro vs Nexa The Real Comparison for Door Installers
Housecall Pro
$79/mo ($948/yr)
VS
Nexa
$279 once — own forever
or 3 payments of $99
Break even: 3.5 months at Housecall Pro's current price.
Bottom Line
Housecall Pro costs door installers $948/year at today's list price. Nexa is $279 once for invoicing, scheduling, CRM, time tracking and accounting in one suite — so it pays for itself in 3.5 months and you own it after that. What it is not: hosted-for-you software with a support desk and a roadmap you can lobby. That is the trade, and the rest of this page is the detail behind it.
The verdict for door installers: Housecall Pro is solid software, but at $79/month it costs $2,844 over 3 years. Nexa does most of what Housecall Pro does for $279 once. For solo door installers and small teams, Nexa is the better deal.
Choose Nexa if:
You're done paying monthly forever
You're a solo operator or small team (1-5)
You need time-tracker, Invoicing, task-manager in one purchase in one tool
You're tired of price increases
You want to own your tools like you own your equipment
Choose Housecall Pro if:
You have a large team (10+) needing enterprise features
You're deeply invested in Housecall Pro's specific workflow
You need a feature Nexa doesn't have yet
What Housecall Pro Actually Costs Door Installers
Today's list price is $79/month — $948 a year, from Housecall Pro's own pricing page. Every figure below is that price, multiplied. Nothing is projected.
Three years at today's price
Year 1$948
Year 2$948
Year 3$948
Three years of Housecall Pro$2,844
Nexa: $279 once (or 3 × $99). Over the same three years, that is $2,565 less.
If Housecall Pro raises its price, the three-year cost goes up; if it cuts it, the cost comes down. We don't guess which. Add-ons, extra seats and card-processing fees are not included, on either side.
Feature-by-Feature
Feature
Housecall Pro
Nexa
Invoicing
✓
✓
Scheduling
✓
✓
CRM
—
✓
Time Tracking
—
✓
Full Accounting
—
✓ (SIMPL)
Task Management
—
✓
Works offline
—
✓
Price
$79/mo
$279 once or 3 × $99
3-Year Total
$2,844
$279
You own it?
No — stop paying, lose access
Yes — forever
✓ and ✗ for Housecall Pro come from its own published feature list. — means the feature isn't in that list, which is not the same as Housecall Pro lacking it: check with them. Three years is at today's price.
What "$279 Once" Does And Doesn't Buy
It buys the software, not a service contract. You install Nexa and it runs on your machine. There is no seat count, and nothing stops working if you stop paying, because there is nothing to stop paying.
Housecall Pro's monthly fee is not only rent. It pays for their hosting, their support desk, and their engineers shipping changes every week. If those matter to how you work, that is a real thing you would be giving up.
Cross-device sync is the one optional extra — $4.99/month if you want your data mirrored between machines. Skip it and Nexa still works; you just sync manually.
The honest risk of buying once: you are betting on us still being here to improve it. The honest risk of renting: the price is theirs to raise, and the graveyard section below is a record of tools that did exactly that.
What Housecall Pro Does Better
Straight from Housecall Pro's own feature set. If one of these is the reason you pay them, that reason does not disappear because Nexa is cheaper.
Online booking for home services
GPS tracking
Postcard marketing campaigns
Professional invoicing
Review collection
A smaller bill up front: plans start at $79/month, against $279 paid once for Nexa.
Housecall Pro is the better call if you need online booking for home services specifically, or if your team is large enough that per-seat pricing still beats buying software outright.
Where business tools fit — for a door installer
Software doesn't do the actual work — it automates the business around it. And that part is the same for every door installer: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.
1
Find the work
Win the job
↓
A lead, a call, a referral — and a quote or estimate that turns it into a booked job.
CRM / contacts
Estimates & proposals
Booking / scheduling
then ↓
2
Manage the work
Do the job
↓
The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.
Job / project tracking
Time tracking
Expenses, materials & add-ons
then ↓
3
Bill for it
Send the bill
↓
The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.
Invoicing
Deposits & credits
then ↓
4
Get paid
Collect payment
↓
Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.
Card / online payments
Automatic reminders
You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)
Watch a job become an invoice
This is the connection that makes the rest worth it. A door installer's job already holds the services, the hours, the add-ons, and the materials — so the invoice builds itself from the work instead of you re-typing it at 9pm. Toggle an add-on or nudge the hours and watch it recompute.
The job Exterior fiberglass door replacement
ServiceOld door and jamb removal1 × $150$150
TimeLabor — tracked on the job
6 hrs× $75/hr$450
MaterialsPre-hung fiberglass door$750
MaterialsShims, flashing tape and trim$90
→
The invoice builds itself
Subtotal$0
Deposit credited−$400
Invoice total$0
You didn't write this invoice — the job did.
Calculate Your Full Stack
Housecall Pro plus whatever else you're paying for:
Email yourself this comparison?
Switching from Housecall Pro
1
Export your data — Go to Settings → export customers, job history, and invoices as CSV files.
2
Set up Nexa — 15-minute setup. Import your customer list and service categories.
3
Parallel run — Run both for 2 weeks. Transition dispatching and booking to Nexa.
4
Cancel Housecall Pro — Cancel subscription (check for early termination fees). Download all records.
✓ 30-day money-back guarantee. Zero risk.
Sound Familiar?
7am pick up the door from the supplier — pre-hung, six-panel fiberglass, exterior. 8am at the jobsite, the old jamb is rotted at the bottom. 9am demo, 11am setting and leveling the new jamb (cedar shims, 4-foot level on every side). Noon lunch in the truck, invoicing from yesterday. 1pm hang the door, install the hardware. 3pm trim and caulk. 5pm punch-list walk with the homeowner. You hand them a paper invoice you'll re-enter tonight.
Jamb-out-of-square on older homes — every install is custom
Security and storm door upsell — when to mention it without losing the close
Replacement vs new-construction quoting — different rough-opening sizes
Supplier backorder on hardware — door's ready, lockset isn't
Slab vs pre-hung labor difference — one is 90 minutes, the other is 4 hours
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
None of that is a software problem you can buy your way out of in one click — it is why the tool you pick matters more than what it costs. Housecall Pro solves some of it. So does Nexa. The difference is what you are left holding in three years.
What This Means for Door Installers
The median door installer earns $55,000/year. At $948/year, Housecall Pro is a recurring slice of that — paid again every year, whether the year was good or not. Owning the same jobs outright is $279 once, and the slice stops.
Nexa is $279 once. Invoicing, scheduling, CRM, time tracking, accounting — all connected, built for door installers. You own it like you own your Shims, levels (4-foot and 2-foot), and a plumb bob.
Is Nexa actually right for a door installer?
An honest fit check — because the wrong tool is worse than no tool.
Right for you if
You run solo or a small crew — like the 15,000 door installers in the US who do, and you wear every hat.
You're tired of paying every month for jobber and a pile of apps that don't talk to each other.
You want to invoice, schedule, and track from the field — not from a back office.
You'd rather own your software once, the way you own your Shims, levels (4-foot and 2-foot), and a plumb bob.
Look elsewhere if
You run a 20+ door installer fleet that needs enterprise dispatch and multi-crew routing — Nexa is built for 1–5, and a fleet platform will serve you better.
You need full payroll for a large team or deep, SKU-level inventory — that's not what Nexa is for.
You're genuinely happy paying monthly and don't mind stitching tools together. No tool fixes a workflow you already like.
The honest fit: if you're a solo or small door installers business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling past a handful of crews, a fleet platform may fit better — and we'd rather tell you that now than sell you the wrong thing.
Door Installers by the numbers — by place
Tax, licensing & seasonality where you operate
1-13.3%income tax
CSLB (Contractors State License Board)licensing
Year-round construction in SoCal. Fire season (June-November) drives restoration demand. Drought impacts landscaping. Earthquake retrofitting is ongoing market.
DBPR (Dept of Business and Professional Regulation)licensing
Hurricane season June-November creates massive restoration demand. Snowbird season November-March boosts service volume 30-40%. Year-round construction. Pool service is year-round industry. Pest control peaks in summer humidity.
Harsh winters in upstate, moderate in NYC. Construction limited in winter upstate. NYC market is enormous but hypercompetitive. Brownstone/pre-war building maintenance is specialized trade. NYC licensing is notoriously complex.
Time tracking, invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
What door installers actually deal with
Jamb-out-of-square on older homes — every install is custom
Security and storm door upsell — when to mention it without losing the close
Replacement vs new-construction quoting — different rough-opening sizes
Supplier backorder on hardware — door's ready, lockset isn't
Slab vs pre-hung labor difference — one is 90 minutes, the other is 4 hours
A day in the life of a door installer
7am pick up the door from the supplier — pre-hung, six-panel fiberglass, exterior. 8am at the jobsite, the old jamb is rotted at the bottom. 9am demo, 11am setting and leveling the new jamb (cedar shims, 4-foot level on every side). Noon lunch in the truck, invoicing from yesterday. 1pm hang the door, install the hardware. 3pm trim and caulk. 5pm punch-list walk with the homeowner. You hand them a paper invoice you'll re-enter tonight.
The tools a working door installer actually owns
Shims, levels (4-foot and 2-foot), and a plumb bob
Oscillating multi-tool for trim removal
Hinge mortising jig (for slab installs)
Bore set for locksets and deadbolts
Finish nailer and 18-gauge brads
Weather stripping and rough-opening insulation
Why door installers leave the big platforms
jobber: No door or window job template. Every job is "service call" — built for HVAC, not finish carpentry.
housecall-pro: No jamb or install nuance. Quote field has "labor hours" — but slab vs pre-hung is 4x different and the app can't tell.
quickbooks: No per-door material margin. You can track total costs but not "this entry door cost $340 in material and sold for $1,100 installed."
Local door installers on Nexa
Real door installers near you who run their business on Nexa — book directly, no platform fee.
Are you a door installer? Post your business and get found in your area — $2.99 one-time.
Or browse every door installer on Nexa →
The kit a working door installer owns
The tools of the trade — each a one-time buy that earns its keep for years.
Core kitEssential
Impact driver and drill
$200–$450
Core kitEssential
Hinge mortise router template
$60–$250
Core kitEssential
Lockset installation kit
$50–$180
Core kitEssential
Levels and shims
$50–$180
Core kitEssential
Oscillating multi-tool
$100–$250
Core kitEssential
Power planer
$70–$250
Core kitEssential
Door jack and lifter
$30–$120
Core kitEssential
Reciprocating saw
$120–$300
Upgrade
Router for weatherstrip and astragal
$90–$250
Upgrade
Van shelving and door cart
$500–$2,500
The core kit, bought once$680–$1,980
Here's the bar that matters: you spent $680–$1,980 on tools that last for years, and never thought twice. So why should the software cost more than your whole kit — every single year? Hold it to the same standard as a good tool: $279, once.
What Nexa does for a door installer — and what it doesn't
The honest version. Nexa was built to beat the rented stack on the jobs that matter most to a door installer — here's where it wins, where the integration wins it anyway, and the things it genuinely doesn't do, with who to use instead. (No tool is best at everything; a guide that pretends otherwise is just an ad.)
Compare the essential business tools for door installers
The usual subscriptions vs. Nexa, side by side. Drag the time slider — every year you keep renting, the gap widens. Nexa is $279, one time.
The reason it wins the set: From the supplier pickup through the rotted-jamb demo and out-of-square leveling to the storm-door upsell and the invoice, one record carries the door so the custom work you priced never gets re-keyed. in one record — $279 once vs 3 subscriptions · ~$1,044/yr.
What Nexa takes off your plate
Job & project trackingvs Jobber →The pre-hung fiberglass job records the rotted-jamb demo and the custom out-of-square leveling, so the extra cedar-shim time on that older home stays on the record and the storm-door upsell is noted for the close instead of living in your head and a separate app.
Invoicingvs FreshBooks →Because the job already captured the jamb rebuild and any storm-door add-on, that work flows straight onto the invoice, so the custom leveling labor you did never gets re-typed into a billing tool that thinks every door is a clean swap.
Books & accountingvs QuickBooks →Each door's jamb, shims, and hardware cost lands in your books as you finish, so you see margin on replacement versus new-construction openings without exporting from Jobber into QuickBooks.
When you run big email campaigns & automations→ ConvertKit →
Prefer to own a piece outright instead of renting? Free and open-source tools (GnuCash, Invoice Ninja and the like) each handle one job if you'll self-host them — a real option, listed because it's true.
These are affiliate links — if you sign up through one, we may earn a commission at no extra cost to you. We list them because they're the honest best pick for the job, Nexa included. As an Amazon Associate we earn from qualifying purchases. Competitor pricing verified 2026-06-12.
How To Read This Page
We make Nexa. It is one of the two options compared here, so read this with that in mind. We have tried to make Housecall Pro's case the way we would want ours made — their strengths above are their own published feature list, not our summary of it.
The prices are Housecall Pro's published list prices, checked on the date shown in the sources below. Plans change; check theirs before you decide.
No customer quotes appear on this page because we do not have any from door installers we can verify. For user testimony, read the independent reviews — Housecall Pro on G2 and on Capterra — where the reviewers are not selling you anything.
Some links on this page earn us money. Tool links may be affiliate links paying us a commission at no extra cost to you, including links to Housecall Pro itself. We list a tool when it is the honest pick for the job, not because of the payout.
Check the price yourself:Housecall Pro's own pricing page is the source for every figure above, read on the date shown in the sources section below.
We are not neutral about subscriptions, and that is the argument, not a hidden assumption: software you pay for once is cheaper over three years than software you rent, unless you need something only the rented one does.
How we put this guide together
We build a door installer's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for a door installer — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.
Where the numbers come from
Vendor pricingJobber $588/yr, Housecall Pro $948/yr, QuickBooks $456/yr, Square — taken from each company's published plans, last verified September 2026. Pricing moves; each name above links straight to that vendor’s own pricing page so you can confirm it before you decide.
Income contextThe $55,000 median we cite for the typical door installer is occupational median annual pay from the U.S. Bureau of Labor Statistics (Occupational Employment & Wage Statistics), compiled April 2026. We use it only to show software spend as a share of real income — your own numbers will differ.
The field's own bodiesWe anchor what door installers actually need to the people who set the standards — UBC. We don't speak for them; we point you to them so you can weigh this guide against the profession's own.
Three-year mathMulti-year totals are today's list price multiplied by the number of years. No price rise is projected, so the figure can be checked against the vendor's own pricing page; if they raise it, the real cost is higher.
Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.
FAQ
Is Nexa really a Housecall Pro replacement?
For solo door installers and small teams, yes. invoicing, scheduling, CRM, time tracking, task management, and full accounting — all for $279 once. Housecall Pro may be better if you have a large team (10+) or need enterprise-specific features.
What does Housecall Pro do that Nexa doesn't?
Housecall Pro has features like Online booking for home services and GPS tracking that some businesses rely on. For most solo door installers, these aren't dealbreakers.
How fast does Nexa pay for itself?
At $79/month, Nexa pays for itself in 3.5 months. After that: $948 saved every year.
Can I pay in installments?
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.