HoneyBook vs Nexa
The Real Comparison for Cosplay Makers

HoneyBook
$36/mo ($432/yr)
VS
Nexa
$279 once — own forever
or 3 payments of $99
Break even: 7.8 months at HoneyBook's current price.

Bottom Line

HoneyBook costs cosplay makers $432/year at today's list price. Nexa is $279 once for invoicing, scheduling, CRM, time tracking and accounting in one suite — so after 7.8 months it has cost less than HoneyBook, and you own it after that. What it is not: hosted-for-you software with a support desk and a roadmap you can lobby. That is the trade, and the rest of this page is the detail behind it.

Can it pay for itself?

Nexa is $279 once, about $23 a month over its first year. Its Drain Guard reads your expenses (from a linked bank, an imported statement, or ones you type in), finds the charges that repeat, and adds them up by the month. Keep or Cut then walks you through them one at a time. Cancel $23 a month of charges you'd forgotten about and Nexa has paid for itself inside the first year, before you count the HoneyBook bill you'd stop paying.

It depends on what you find and what you cancel, so we don't promise a number. In our demo data, Drain Guard finds 5 subscriptions adding up to $110.13 a month. That is sample data, not a customer's.

The verdict for cosplay makers: HoneyBook is solid software, but at $36/month it costs $1,296 over 3 years. Nexa does most of what HoneyBook does for $279 once. For solo cosplay makers and small teams, Nexa is the better deal.

Choose Nexa if:

  • You're done paying monthly forever
  • You're a solo operator or small team (1-5)
  • You need invoicing, task manager and financial suite in one tool
  • You're tired of price increases
  • You want to own your tools like you own your equipment

Choose HoneyBook if:

  • You have a large team (10+) needing enterprise features
  • You're deeply invested in HoneyBook's specific workflow
  • You need a feature Nexa doesn't have yet

Sound Familiar?

I'm fifty hours into a Warhammer power armor commission quoted at a flat price, with maybe forty to go. This morning I'm patterning the greaves: I wrap the client's leg cast in plastic wrap and tape, draw seam lines, cut it off and transfer the pattern to 10mm EVA foam. I cut with a fresh blade at a 45-degree bevel, heat-form the curves with the heat gun, and glue seams with contact cement, then add details in 2mm craft foam and Worbla for the trim. After lunch I seal the chest piece with several coats of flexible primer and sand it between coats, then prime and paint it in the chapter colors with an airbrush, dry-brush silver on the edges, and weather it with a black wash so it looks battle-worn. I solder and fit the LED strips in the helmet vents, run the wiring to a battery pack in the backpack, and test it before closing it up. The client messages asking for bigger shoulder pads with an extra skull, which isn't in the quote, so I send a revised price and a photo of the scale. I also have three props in the queue for other clients: a sword that needs a PVC core for strength, a staff and a helmet. The convention is six weeks out, so I block out the build days on paper backward from it. At night I order more foam and contact cement, photograph progress for the client and my page, answer commission inquiries, and note the materials I've spent so far on this build.

Invoicing, job tracking, the books and client records are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.

None of that is a software problem you can buy your way out of in one click — it is why the tool you pick matters more than what it costs. HoneyBook solves some of it. So does Nexa. The difference is what you are left holding in three years.

What HoneyBook Actually Costs Cosplay Makers

Today's list price is $36/month — $432 a year, from HoneyBook's own pricing page. Every figure below is that price, multiplied. Nothing is projected.

Three years at today's price

Year 1$432
Year 2$432
Year 3$432
Three years of HoneyBook$1,296

Nexa: $279 once (or 3 × $99). Over the same three years, that is $1,017 less.

If HoneyBook raises its price, the three-year cost goes up; if it cuts it, the cost comes down. We don't guess which. Add-ons, extra seats and card-processing fees are not included, on either side.

Feature-by-Feature

FeatureHoneyBookNexa
Invoicing✓✓
Scheduling✓✓
CRM✓✓
Time Tracking—✓
Full Accounting—✓ (SIMPL)
Task Management—✓
Works offline—✓
Price$36/mo$279 once
or 3 × $99
3-Year Total$1,296$279
You own it?No — stop paying, lose accessYes — forever

✓ and ✗ for HoneyBook come from its own published feature list. — means the feature isn't in that list, which is not the same as HoneyBook lacking it: check with them. Three years is at today's price.

What "$279 Once" Does And Doesn't Buy

What HoneyBook Does Better

Straight from HoneyBook's own feature set. If one of these is the reason you pay them, that reason does not disappear because Nexa is cheaper.

HoneyBook is the better call if you need beautiful proposals and contracts specifically, or if your team is large enough that per-seat pricing still beats buying software outright.

What HoneyBook Is Built For

HoneyBook describes itself as built for anyone with clients, aimed at small businesses that work with clients. Its categories are event services, marketing, design and creative, professional services, personal services, and home and real estate. (honeybook.com)

Read on each linked page in October 2026. Check them again before you decide; vendors change plans often.

Where business tools fit — for a cosplay maker

Software doesn't do the actual work — it automates the business around it. And that part is the same for every cosplay maker: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.

  1. 1
    Find the work

    Win the job

    ↓

    A lead, a call, a referral — and a quote or estimate that turns it into a booked job.

    • CRM / contacts
    • Estimates & proposals
    • Booking / scheduling
    then ↓
  2. 2

    The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.

    • Job / project tracking
    • Time tracking
    • Expenses, materials & add-ons
    then ↓
  3. 3

    The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.

    • Invoicing
    • Deposits & credits
    then ↓
  4. 4

    Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.

    • Card / online payments
    • Automatic reminders

You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)

Watch a job become an invoice

This is the connection that makes the rest worth it. A cosplay maker's job already holds the services, the hours, the add-ons, and the materials — so the invoice builds itself from the work instead of you re-typing it at 9pm. Toggle an add-on or nudge the hours and watch it recompute.

The job Warhammer power armor commission
Service Full armor build (foam, heat forming, paint) 1 × $1,200 $1,200
Materials EVA foam, paint and LEDs $280
The invoice builds itself
Subtotal$1,600
Deposit credited−$600
Invoice total$1,000

You didn't write this invoice — the job did.

Calculate Your Full Stack

HoneyBook plus whatever else you're paying for:

Email yourself this comparison?

Switching from HoneyBook

1
Export your data — Go to Company Settings → export contacts and projects. Download templates separately.
2
Set up Nexa — 15-minute setup. Import your contacts and recreate your key templates.
3
Parallel run — Run both for 1-2 weeks. Transition active projects after they complete.
4
Cancel HoneyBook — Cancel before renewal. Save any contract templates as PDFs.
✓ 30-day money-back guarantee. Zero risk.

What This Means for Cosplay Makers

The median cosplay maker earns $25,000/year. At $432/year, HoneyBook is a recurring slice of that — paid again every year, whether the year was good or not. Owning the same jobs outright is $279 once, and the slice stops.

Nexa is $279 once. Invoicing, scheduling, CRM, time tracking, accounting — all connected, built for cosplay makers. You own it like you own your Worbla and EVA foam supplies.

Is Nexa actually right for a cosplay maker?

An honest fit check — because the wrong tool is worse than no tool.

Right for you if

  • You run solo or a small team — like the 20,000 cosplay makers in the US who do, and you wear every hat.
  • You're tired of paying every month for honeybook and a pile of apps that don't talk to each other.
  • You want invoicing, scheduling, and client tracking in one place — not scattered across five apps.
  • You'd rather own your software once, the way you own your Worbla and EVA foam supplies.

Look elsewhere if

  • You have a large team that needs enterprise seats, granular roles, and dedicated admin staff — Nexa is built for solo and small operators (1–5), and a bigger platform will serve you better.
  • You need full payroll for a large team or deep, SKU-level inventory — that's not what Nexa is for.
  • You're genuinely happy paying monthly and don't mind stitching tools together. No tool fixes a workflow you already like.

The honest fit: if you're a solo or small cosplay makers business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling into a large team with dedicated admin staff, a bigger platform may fit better — and we'd rather tell you that now than sell you the wrong thing.

Cosplay Makers by the numbers — by place

Tax & registration where you operate

Where cosplay makers actually talk shop

Your people are already online — swapping real numbers, tool picks, and war stories. Here's where to find them.

Recent in r/sweatystartup · Where solo service businesses swap real numbers and hard-won lessons.
Quit my six-figure corporate sales job to buy a home service franchise. On pace to do $2M+ this year. AMA. Three years ago I posted about starting a company with no construction experience. Here's what I've learned since. I run my business — it doesn't run me. I think AI search is about to change how local service businesses get found. Anyone else seeing this? Update: $12k/mo revenue after 1.5 years. What I'd do differently from day one.

Subreddits worth your time

r/cosplay

Active community — tool picks, pricing, and day-to-day questions.

Open on Reddit →
r/cosplayprops

Active community — tool picks, pricing, and day-to-day questions.

Open on Reddit →
r/cosplayers

Active community — tool picks, pricing, and day-to-day questions.

Open on Reddit →

Facebook groups to join

Cosplay Commission Artists Cosplay Makers Business Worbla & Foam Armor Builders
Podcasts
🎧 Cosplay Sewing Guild Podcast
Forums
Worbla CommunityThe RPF (Replica Prop Forum)

Invoicing, job tracking, the books and client records are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.

What cosplay makers actually deal with

A day in the life of a cosplay maker

I'm fifty hours into a Warhammer power armor commission quoted at a flat price, with maybe forty to go. This morning I'm patterning the greaves: I wrap the client's leg cast in plastic wrap and tape, draw seam lines, cut it off and transfer the pattern to 10mm EVA foam. I cut with a fresh blade at a 45-degree bevel, heat-form the curves with the heat gun, and glue seams with contact cement, then add details in 2mm craft foam and Worbla for the trim. After lunch I seal the chest piece with several coats of flexible primer and sand it between coats, then prime and paint it in the chapter colors with an airbrush, dry-brush silver on the edges, and weather it with a black wash so it looks battle-worn. I solder and fit the LED strips in the helmet vents, run the wiring to a battery pack in the backpack, and test it before closing it up. The client messages asking for bigger shoulder pads with an extra skull, which isn't in the quote, so I send a revised price and a photo of the scale. I also have three props in the queue for other clients: a sword that needs a PVC core for strength, a staff and a helmet. The convention is six weeks out, so I block out the build days on paper backward from it. At night I order more foam and contact cement, photograph progress for the client and my page, answer commission inquiries, and note the materials I've spent so far on this build.

The tools a working cosplay maker actually owns

Why cosplay makers leave the big platforms

Where cosplay makers actually talk shop

Local cosplay makers on Nexa

Real cosplay makers near you who run their business on Nexa — book directly, no platform fee. Are you a cosplay maker? Post your business and get found in your area — $2.99 one-time. Or browse every cosplay maker on Nexa →

The kit a working cosplay maker owns

The tools of the trade — each a one-time buy that earns its keep for years.

Worbla and EVA foam supplies

Heat gun and Dremel

Sewing machine and serger

3D printer for armor details

You paid for these once because good tools last. That's the bar your software should clear too — priced like a tool you own, $279 once, not a subscription that costs more than your kit every year.

Is Nexa the right call for a cosplay maker?

The honest version. Nexa was built to beat the rented stack on the jobs that matter most to a cosplay maker — here's where it wins, where the integration wins it anyway, and the things it genuinely doesn't do, with who to use instead. (No tool is best at everything; a guide that pretends otherwise is just an ad.)

Compare the essential business tools for cosplay makers

The usual subscriptions vs. Nexa, side by side. Drag the time slider — every year you keep renting, the gap widens. Nexa is $279, one time.

On the work a cosplay maker actually lives in — invoicing, job & project tracking, books & accounting and crm & clients — Nexa holds its own against the usual rentals (FreshBooks →, Jobber →, QuickBooks →). Head-to-head on any single one it's competitive; what tips it is the thing none of them can copy: The Warhammer commission flows from the client's CRM record, through a job holding 80-plus hours and foam, paint, and LED costs, into a 1,200-dollar invoice and books that show its true margin, all one record instead of HoneyBook and Wave. in one record, no re-typing between four apps. One tool, $279 once, against 4 subscriptions · ~$1,344/yr. Concretely: on invoicing, The 1,200-dollar Warhammer armor invoices off the job that already holds 180 in foam, 60 in paint, and 40 in LEDs, so when you are 50 hours into 90 the bill reflects real materials and time, not a quote that left you at 9.20 an hour.

Where it's not the answer: if you run real payroll for a team (use Gusto →), or run big email campaigns & automations (use ConvertKit →), or sell through a full online store (use Shopify →). Those tools are better at their one thing, and we'd rather point you to them than pretend.

Prefer to own a piece outright instead of renting? Free and open-source tools (GnuCash, Invoice Ninja and the like) each handle one job if you'll self-host them — a real option, listed because it's true.

Competitor pricing verified 2026-06-12.

How To Read This Page

How we put this guide together

We build a cosplay maker's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for a cosplay maker — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.

Where the numbers come from

Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.

FAQ

Is Nexa really a HoneyBook replacement?

For solo cosplay makers and small teams, yes. invoicing, scheduling, CRM, time tracking, task management, and full accounting — all for $279 once. HoneyBook may be better if you have a large team (10+) or need enterprise-specific features.

What does HoneyBook do that Nexa doesn't?

HoneyBook has features like Beautiful proposals and contracts and Client portal that some businesses rely on. For most solo cosplay makers, these aren't dealbreakers.

How fast does Nexa pay for itself?

At $36/month, Nexa pays for itself in 7.8 months. After that: $432 saved every year.

Can I pay in installments?

Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.

$1,296 Over 3 Years. Or $279 Once (or 3 × $99).

Own your tools. Stop renting your software.

Get Nexa — $279 Once
or 3 payments of $99
✓ 30-day money-back — save $500 or full refund

More Comparisons for Cosplay Makers