The real cost of woodturner software — and how to stop renting it
What a woodturner actually pays for tools over three years, and the buy-once and free options most never hear about.
Bottom line
A typical woodturner stack — invoicing, job tracking, accounting — rents for about $1,044/year, roughly $3,132 over three years and climbing. The same jobs, owned in one suite, are $279 once. On a median woodturner income of $30,000/year, that's a recurring slice you don't get back.
Can it pay for itself?
Nexa is $279 once, about $23 a month over its first year. Its Drain Guard reads your expenses (from a linked bank, an imported statement, or ones you type in), finds the charges that repeat, and adds them up by the month. Keep or Cut then walks you through them one at a time. Cancel $23 a month of charges you'd forgotten about and Nexa has paid for itself inside the first year.
It depends on what you find and what you cancel, so we don't promise a number. In our demo data, Drain Guard finds 5 subscriptions adding up to $110.13 a month. That is sample data, not a customer's.
Where business tools fit — for a woodturner
Software doesn't do the actual work — it automates the business around it. And that part is the same for every woodturner: find the work, manage it, bill for it, get paid. Each step has a tool — and the right single tool runs the whole loop, so the handoffs are automatic and you get back to the actual work. Tap a step to see what gets automated.
-
1Find the work
Win the job
↓A lead, a call, a referral — and a quote or estimate that turns it into a booked job.
- CRM / contacts
- Estimates & proposals
- Booking / scheduling
then ↓ -
2Manage the work
Do the job
↓The part you actually get paid for — with the time, materials, add-ons, and tasks tracked as you go, not guessed at later.
- Job / project tracking
- Time tracking
- Expenses, materials & add-ons
then ↓ -
3Bill for it
Send the bill
↓The work becomes the invoice — the hours, the add-ons, the materials, the deposit credited — totaled and sent, instead of re-typed at 9pm.
- Invoicing
- Deposits & credits
then ↓ -
4Get paid
Collect payment
↓Paid by card or link, the deposit credited, and what's overdue chased — without you doing it by hand.
- Card / online payments
- Automatic reminders
You can stitch four separate subscriptions across these four steps, or run one tool that does the whole flow so a booking becomes a job becomes an invoice becomes a payment without re-typing. Either way the goal is the same: less time on the business of the business, more on the actual work. (Nexa is built to be the one — but the honest options for each step are above and below.)
Is Nexa the right call for a woodturner?
The honest version. Nexa was built to beat the rented stack on the jobs that matter most to a woodturner — here's where it wins, where the integration wins it anyway, and the things it genuinely doesn't do, with who to use instead. (No tool is best at everything; a guide that pretends otherwise is just an ad.)
Compare the essential business tools for woodturners
The usual subscriptions vs. Nexa, side by side. Drag the time slider — every year you keep renting, the gap widens. Nexa is $279, one time.
On the work a woodturner actually lives in — invoicing, job & project tracking and books & accounting — Nexa holds its own against the usual rentals (FreshBooks →, Jobber →, QuickBooks →). Head-to-head on any single one it's competitive; what tips it is the thing none of them can copy: Each bowl flows from a job that holds its drying time and figure into an invoice at the price that piece earned and into books that capture even cash craft-show sales, one record instead of a shoebox and Wave. in one record, no re-typing between four apps. One tool, $279 once, against 3 subscriptions · ~$1,044/yr. Concretely: on invoicing, A bowl that sells for 60 to 150 depending on size and figure invoices straight from its own job at the price that piece earned, so your inconsistent per-piece pricing is captured per record instead of averaged into a number that loses money.
Where it's not the answer: if you run real payroll for a team (use Gusto →), or run big email campaigns & automations (use ConvertKit →). Those tools are better at their one thing, and we'd rather point you to them than pretend.
Prefer to own a piece outright instead of renting? Free and open-source tools (GnuCash, Invoice Ninja and the like) each handle one job if you'll self-host them — a real option, listed because it's true.
These are affiliate links — if you sign up through one, we may earn a commission at no extra cost to you. We list them because they're the honest best pick for the job, Nexa included. As an Amazon Associate we earn from qualifying purchases. Competitor pricing verified 2026-06-12.
What the software a woodturner rents has done to its prices
Dated changes to the subscriptions a woodturner might rent. Each one links the announcement or report it comes from. Tap one for the numbers.
-
Feb 2026 QuickBooks — QuickBooks Desktop Pro Plus renewals rise from $999 to $1,149 a year ↓$999/year→$1,149/year
For renewals on or after February 1, 2026, Pro Plus and Mac Plus went from $999 to $1,149 a year for one user, and each extra seat from $200 to $230.
Source: SWK Technologies, Insightful Accountant (Dec 2, 2025)
-
Jul 2025 QuickBooks — QuickBooks Online raises every plan 8.6% to 17% ↓Plus $99/month→Plus $115/month
From July 1, 2025: Simple Start $35 to $38, Essentials $65 to $75, Plus $99 to $115, Advanced $235 to $275 a month.
Source: Woodard Report (May 27, 2025)
Only changes we can link to a vendor announcement or a named publication are listed. Plans, add-ons and discounts vary, so check the vendor's current pricing page before you decide.
The kit a working woodturner owns
The tools of the trade — each a one-time buy that earns its keep for years.
Wood lathe
Turning gouges and skew chisels
Four-jaw chuck and jaw sets
Sharpening system with CBN wheel
Bandsaw for blank prep
Chainsaw for harvesting blanks
Face shield and dust extraction
Calipers, live centre and steady rest
Vacuum chuck system
Here's the bar that matters: you spent $2,560–$13,050 on tools that last for years, and never thought twice. So why should the software cost more than your whole kit — every single year? Hold it to the same standard as a good tool: $279, once.
Need to replace a piece of the kit? Here's where woodturners get it
Affiliate links — we may earn a small commission at no extra cost to you. As an Amazon Associate we earn from qualifying purchases.
Sound familiar?
I'm in the shop by 7, and the walnut blanks I rough-turned last spring are finally dry; I've been weighing them on a kitchen scale and the weight has stopped dropping. The order is a custom walnut salad bowl set: one 12-inch serving bowl and four 7-inch sides. I mount the first blank between centers, true the outside with a bowl gouge, cut a tenon for the chuck and flip it. Hollowing is the swept-back gouge riding the bevel, then a scraper to clean up the transition at the bottom, and I check wall thickness with calipers so the set matches at about 5/16. Every twenty minutes I'm at the grinder putting a fresh edge on the gouge, and I work through sandpaper from 120 to 400 with the lathe running slow. One side bowl shows a crack running from a knot I missed when I roughed it out, so either I stabilize it with CA glue and walnut dust or it becomes firewood and I rough another from the log a neighbor gave me after the storm. Afternoon I finish with food-safe oil and wax and let the first coat soak in. Then I get ready for Saturday's craft fair, $200 booth fee: price tags on the stock bowls and a vase, $60 to $150 depending on size and figure, a cash box with change, the card reader charged. In the evening I send the customer a photo of the cracked bowl and the balance invoice, and tally what I spent on sandpaper, glue and booth fees against what the last show brought in.
Invoicing, job tracking and the books are the pieces of that day. Some tools rent you each piece separately. A few — Nexa among them — bundle the lot into something you buy once. The sections below price both routes honestly.
Where woodturners actually talk shop
Your people are already online — swapping real numbers, tool picks, and war stories. Here's where to find them.
Subreddits worth your time
Active community — tool picks, pricing, and day-to-day questions.
Open on Reddit →Active community — tool picks, pricing, and day-to-day questions.
Open on Reddit →Facebook groups to join
What's moving for woodturners near you
Real, current, local — the news in your trade and the suppliers you actually buy from. It changes every week, which is exactly the point.
Where woodturners stock up — and this week's deals
tools, lumber, building materials, hardware
Pro program: Pro Xtra
tools, lumber, materials, appliances, paint
Pro program: MyLowe's Pro Rewards
hardware, fasteners, tools, paint, fittings
Pro program: Ace Rewards
hardware, tools, paint, plumbing/electrical parts
Pro program: True Value Rewards
discount tools, power & hand tools, jobsite gear
Pro program: Inside Track Club
Is Nexa actually right for a woodturner?
An honest fit check — because the wrong tool is worse than no tool.
Right for you if
- You run solo or a small crew — like the 12,000 woodturners in the US who do, and you wear every hat.
- You're tired of paying every month for quickbooks and a pile of apps that don't talk to each other.
- You want to invoice, schedule, and track from the field — not from a back office.
- You'd rather own your software once, the way you own your Wood lathe.
Look elsewhere if
- You run a 20+ woodturner fleet that needs enterprise dispatch and multi-crew routing — Nexa is built for 1–5, and a fleet platform will serve you better.
- You need full payroll for a large team or deep, SKU-level inventory — that's not what Nexa is for.
- You're genuinely happy paying monthly and don't mind stitching tools together. No tool fixes a workflow you already like.
The honest fit: if you're a solo or small woodturners business that owns its tools and is sick of renting software, Nexa replaces your whole stack for $279 once. If you're scaling past a handful of crews, a fleet platform may fit better — and we'd rather tell you that now than sell you the wrong thing.
What woodturners actually deal with
- Wood blanks are often free (storm damage, mill scraps) but drying takes months
- Each piece is unique so pricing is inconsistent
- Craft show sales are cash-heavy with minimal tracking
- Tool sharpening and replacement costs add up
A day in the life of a woodturner
I'm in the shop by 7, and the walnut blanks I rough-turned last spring are finally dry; I've been weighing them on a kitchen scale and the weight has stopped dropping. The order is a custom walnut salad bowl set: one 12-inch serving bowl and four 7-inch sides. I mount the first blank between centers, true the outside with a bowl gouge, cut a tenon for the chuck and flip it. Hollowing is the swept-back gouge riding the bevel, then a scraper to clean up the transition at the bottom, and I check wall thickness with calipers so the set matches at about 5/16. Every twenty minutes I'm at the grinder putting a fresh edge on the gouge, and I work through sandpaper from 120 to 400 with the lathe running slow. One side bowl shows a crack running from a knot I missed when I roughed it out, so either I stabilize it with CA glue and walnut dust or it becomes firewood and I rough another from the log a neighbor gave me after the storm. Afternoon I finish with food-safe oil and wax and let the first coat soak in. Then I get ready for Saturday's craft fair, $200 booth fee: price tags on the stock bowls and a vase, $60 to $150 depending on size and figure, a cash box with change, the card reader charged. In the evening I send the customer a photo of the cracked bowl and the balance invoice, and tally what I spent on sandpaper, glue and booth fees against what the last show brought in.
Why woodturners leave the big platforms
- quickbooks: $55/month for a hobby-turned-business. Many woodturners are retired and selling casually.
- wave: Can't track per-show profitability or factor in drying time and free material costs.
Where woodturners actually talk shop
- r/turning (Reddit)
- r/woodworking (Reddit)
- AAW Forum (Forum)
- WoodCentral Turning Forum (Forum)
- Mike Waldt (YouTube)
- Carl Jacobson (YouTube)
- Stuart Batty (YouTube)
Local woodturners on Nexa
Real woodturners near you who run their business on Nexa — book directly, no platform fee. Are you a woodturner? Post your business and get found in your area — $2.99 one-time. Or browse every woodturner on Nexa →
Woodturners by the numbers — by place
Tax, licensing & seasonality where you operate
Year-round construction in SoCal. Fire season (June-November) drives restoration demand. Drought impacts landscaping. Earthquake retrofitting is ongoing market.
Extreme summer heat drives HVAC demand. Hurricane risk on Gulf Coast. Year-round construction. Rapid population growth in DFW, Austin, Houston, San Antonio creates sustained demand. Freeze events (like 2021) create emergency plumbing/HVAC surge.
Hurricane season June-November creates massive restoration demand. Snowbird season November-March boosts service volume 30-40%. Year-round construction. Pool service is year-round industry. Pest control peaks in summer humidity.
Harsh winters in upstate, moderate in NYC. Construction limited in winter upstate. NYC market is enormous but hypercompetitive. Brownstone/pre-war building maintenance is specialized trade. NYC licensing is notoriously complex.
How we put this guide together
We build a woodturner's guide the same way every time, and we'd rather you trust it than take it on faith. Nexa is our product, so the test we hold ourselves to is simple: a tool only "wins" a job here when it genuinely does that job better for a woodturner — and where something free, open-source, or buy-once does it better, we say so and link you to it. Where Nexa falls short (payroll is the honest example), we name the alternative outright.
Where the numbers come from
- Vendor pricingQuickBooks $456/yr, Wave $228/yr, Square — taken from each company's published plans, last verified September 2026. Pricing moves; each name above links straight to that vendor’s own pricing page so you can confirm it before you decide.
- Income contextThe $30,000 median we cite for the typical woodturner is occupational median annual pay from the U.S. Bureau of Labor Statistics (Occupational Employment & Wage Statistics), compiled April 2026. We use it only to show software spend as a share of real income — your own numbers will differ.
- Price-change historyDated changes — QuickBooks (February 2026), QuickBooks (July 2025), QuickBooks (September 2024), and more. Each links the vendor announcement or named publication that documents it.
- Multi-year mathMulti-year totals are today's list prices multiplied by the number of years. No price rise is projected, so every figure can be checked against the vendors' own pricing pages; if they raise prices, the real cost is higher.
Found something out of date? Prices change and we don't catch every move the day it happens. This guide is published and maintained by the Nexa team; if a figure here is wrong, tell us and we'll fix it — getting it right matters more to us than the sale.
FAQ
Free and open-source tools (listed above) cost nothing but your own time to host and maintain. If your time is worth more than that, a one-time purchase or a single suite usually wins over a stack of monthly subscriptions within the first year or two.
Yes — the modules are designed to work the way woodturners actually work, all connected, $279 once. Whether that beats the free/self-hosted or buy-once options above depends on how much you want handled for you.
Export your data as CSV and import it in about 15 minutes. Run the old and new side by side for a week, then cancel the subscriptions you're replacing once you're confident.
The core kit is wood lathe, turning gouges and skew chisels, four-jaw chuck and jaw sets, sharpening system with cbn wheel, bandsaw for blank prep, chainsaw for harvesting blanks, face shield and dust extraction, calipers, live centre and steady rest. Most of it is a one-time purchase, and buying the pro-grade version of the few things you use daily costs less over five years than replacing the cheap one twice.
Budget $2,560–$13,050 for the core kit (equipment pricing checked September 2026). The next tier — the gear you add once work is steady — runs well beyond that, so most people start with the core and upgrade out of revenue rather than borrowing for it.
Recurring supplies run about $360–$1,550 a month (equipment pricing checked September 2026) — mainly blanks, bowl stock and exotics, ca glue, finishes, oils and wax, abrasives and sanding discs. That is the number people forget when they price a job off the tool cost alone.
Own your tools instead of renting them
If owning one connected suite sounds better than renting a stack — or self-hosting one — Nexa is $279 once for everything above.
See Nexa — $279 once30-day money-back guarantee. Or use the free and buy-once options above — we listed them for a reason.