Helical Pier Installers on QuickBooks pay $55/month — $660/year. Over three years, that's $2,214. Nexa is $279 once. Break-even runs about 5.1 months. The median helical pier installer earns $55,000/year, so QuickBooks's annual cost is roughly 1.2% of typical revenue — every year, forever.
That's $2,214 gone. And you don't own anything. Stop paying, lose access.
See the full history of QuickBooks price changes in the SaaS Graveyard →
You're not the only one who's had enough.
Helical Pier Installers face unique challenges: Producing per-pier torque logs that convert installation torque to allowable capacity in a format the project engineer will stamp and sign off on, the install is worthless without documentation that satisfies the EOR. Bidding piers to an unknown depth: the soil report guesses refusal at 18 feet, the helix hits running sand and needs three extensions, and now the fixed bid is upside down. Carrying equipment financing and a six-figure pile inventory while general contractors pay on 30-to-60-day draw schedules tied to inspections that keep slipping. Permits, geotech coordination, and engineer sign-off all stacking before a single pier turns, and transferable-warranty claims years later that require pulling the original torque records and elevation logs. On top of all that, QuickBooks charges $55/month ($660/year) — money that comes directly from your revenue. The median helical pier installer earns $55,000/year. Software at $660/year is a meaningful percentage of that income, every year, forever. And you do not own anything.
Your Hydraulic torque drive head (Eskridge or Pengo planetary motor) run off an excavator or skid steer auxiliary hydraulics is yours. You bought it once. Nexa works the same way — $279 once for invoicing, scheduling, CRM, time tracking, and full accounting. All connected. All offline-capable. You own it like you own your tools.
QuickBooks is just one piece. What else are you losing money on?
Want this breakdown emailed to you?
Your exact QuickBooks cost, full stack total, and what switching saves. 10 seconds.
| Feature | QuickBooks | Nexa |
|---|---|---|
| Invoicing | ✓ | ✓ |
| Scheduling | ✗ | ✓ |
| CRM | ✗ | ✓ |
| Time Tracking | ✗ | ✓ |
| Full Accounting | ✗ | ✓ (SIMPL) |
| Task Management | ✗ | ✓ |
| Price | $55/mo forever | $279 once or 3 × $99 |
| 3-Year Cost | $2,214 | $279 |
| Stop paying? | Lose everything | Keep everything forever |
Most helical pier installers are fully switched before the weekend.
Go to Reports → export to CSV. Download clients, invoices, expenses.
15-minute setup. Import your clients and expense categories.
Run both for 1-2 weeks. Verify everything transferred.
Cancel subscription. Download final backup. You're done.
Morning starts at the yard loading lead sections, extensions, and the matched helix plates onto the trailer, double-checking shaft type against the engineer's design before the truck leaves. On site, the first hour is access and layout, staking pier locations off the foundation plan, confirming no buried utilities, and figuring out how to fit a mini ex into a four-foot side yard against a settling porch. The drive head couples to the first lead and it goes down clean to eight feet, then bites into clay and the torque gauge climbs; by the time it hits the design torque the crew has added two extensions and is logging the reading at every interval. Each pier gets its own line: location, total depth, final installation torque, calculated capacity. A few hit refusal early on cobble and have to be relocated; others chase soft fill deeper than anyone bid. Afternoon is bracket setup and the synchronized lift, cylinders pressurized in sequence while someone watches the laser and the drywall cracks for movement, lifting in fractions of an inch. The day ends writing up torque logs and elevation readings for the EOR, photographing every bracket, and texting the GC that piers 1 through 9 are in and inspection-ready.
Real helical pier installers near you who run their business on Nexa — book directly, no platform fee. Are you a helical pier installer? Post your business and get found in your area — $2.99 one-time. Or browse every helical pier installer on Nexa →
For solo operators and small teams (1-5), yes. Nexa includes invoicing, scheduling, CRM, time tracking, task management, and full accounting. QuickBooks may be better if you have a large team (10+) or need enterprise-specific features.
It's $7.75/month over 3 years. QuickBooks is $55/month — that's $2,214 over 3 years. Which is more? And if you'd rather split it, Nexa is also available as 3 payments of $99.
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.
30-day money-back guarantee. Full refund. If Nexa doesn't save you $500 in year one, you get every penny back.
Export your data from QuickBooks as CSV, import into Nexa in about 5 minutes.
The average solo operator there spends about $1,600/year on software — and helical pier installer face their own version of that math. Tennessee has no state income tax. But tri-state metro means clients in MS (5%) and AR (5.5%) add complexity. Tennessee contractor licensing for projects over $25,000. Memphis/Shelby County requires a business license. MS and AR sides have separate requirements.
Numbers reflect typical solo operators in the Memphis metro. Your situation will vary.
Specific gaps Helical Pier Installers run into with QuickBooks, and what Nexa does instead.
Recent threads from Reddit and Hacker News mentioning QuickBooks. Sentiment scored automatically — click through to read the full thread.
$2,214 over 3 years. Or $279 once (or 3 × $99). Own your tools.
Get Nexa — $279 Once