Overhead Door Installers on Jobber pay $69/month — $828/year. Over three years, that's $2,778. Nexa is $279 once. Break-even runs about 4.0 months. The median overhead door installer earns $55,000/year, so Jobber's annual cost is roughly 1.5% of typical revenue — every year, forever.
That's $2,778 gone. And you don't own anything. Stop paying, lose access.
You're not the only one who's had enough.
Overhead Door Installers face unique challenges: Rough openings are rarely square or the right size, so a clean install means shimming the jambs plumb and dealing with headroom and side-room the builder never accounted for. Low-headroom and high-lift situations need special track and double-track hardware, and discovering that on install day instead of at measure means a return trip and a reorder. Coordinating with the GC's schedule on new construction means the floor, drywall, and power all have to be ready, and showing up to an opening that isn't finished wastes a crew day. Customers compare a builder-grade single-layer door price to an insulated steel door and don't see why the heavier, quieter, better-sealed door costs more to buy and to hang. On top of all that, Jobber charges $69/month ($828/year) — money that comes directly from your revenue. The median overhead door installer earns $55,000/year. Software at $828/year is a meaningful percentage of that income, every year, forever. And you do not own anything.
Your Sectional door panels, hinges, and rollers is yours. You bought it once. Nexa works the same way — $279 once for invoicing, scheduling, CRM, time tracking, and full accounting. All connected. All offline-capable. You own it like you own your tools.
Jobber is just one piece. What else are you losing money on?
Want this breakdown emailed to you?
Your exact Jobber cost, full stack total, and what switching saves. 10 seconds.
| Feature | Jobber | Nexa |
|---|---|---|
| Invoicing | ✓ | ✓ |
| Scheduling | ✗ | ✓ |
| CRM | ✗ | ✓ |
| Time Tracking | ✗ | ✓ |
| Full Accounting | ✗ | ✓ (SIMPL) |
| Task Management | ✗ | ✓ |
| Price | $69/mo forever | $279 once or 3 × $99 |
| 3-Year Cost | $2,778 | $279 |
| Stop paying? | Lose everything | Keep everything forever |
Most overhead door installers are fully switched before the weekend.
Go to Settings → Data Export. Download clients, jobs, and invoices as CSV.
15-minute setup. Import your client list and job categories.
Run both for 1-2 weeks to verify scheduled jobs transfer cleanly.
Cancel subscription before your next billing cycle. Download final export.
He measures twice before a panel comes off the truck, because a rough opening is almost never the size the builder said and rarely plumb. He runs a laser down both jambs, checks the headroom for the spring and the opener rail, and the side-room for the vertical track, because this opening turns out tight on headroom and he's glad he caught it at measure so the low-headroom track was on the order. He builds the door from the bottom panel up, hinging each section and setting rollers into the track as the door grows in the opening, shimming the jambs as he goes so the whole thing runs true. The torsion spring assembly goes up top and he winds it with the bars, the same focused, dangerous task that defines the trade. He hangs the opener, sets the rail, and dials in the safety reversing sensors and the force settings until the door stops and reverses on an obstruction, because a door that crushes is a callback at best. He cycles it a couple dozen times listening for binds and rubs, adjusting until it runs quiet. The customer comes out and asks why this insulated steel door cost what it did versus the thin builder door their neighbor got, and he walks them through the difference in weight, seal, and quiet. He logs the door model, spring size, and opener settings before packing up.
Real overhead door installers near you who run their business on Nexa — book directly, no platform fee. Are you an overhead door installer? Post your business and get found in your area — $2.99 one-time. Or browse every overhead door installer on Nexa →
For solo operators and small teams (1-5), yes. Nexa includes invoicing, scheduling, CRM, time tracking, task management, and full accounting. Jobber may be better if you have a large team (10+) or need enterprise-specific features.
It's $7.75/month over 3 years. Jobber is $69/month — that's $2,778 over 3 years. Which is more? And if you'd rather split it, Nexa is also available as 3 payments of $99.
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.
30-day money-back guarantee. Full refund. If Nexa doesn't save you $500 in year one, you get every penny back.
Export your data from Jobber as CSV, import into Nexa in about 5 minutes.
The average solo operator there spends about $1,700/year on software — and overhead door installer face their own version of that math. Mexico requires CFDI electronic invoicing for all formal businesses. ISR and IVA apply. Requirements vary by country and locality. Check local regulations.
Numbers reflect typical solo operators in the Aguascalientes metro. Your situation will vary.
Specific gaps Overhead Door Installers run into with Jobber, and what Nexa does instead.
$2,778 over 3 years. Or $279 once (or 3 × $99). Own your tools.
Get Nexa — $279 Once