Hot Tub Installers on Jobber pay $69/month — $828/year. Over three years, that's $2,778. Nexa is $279 once. Break-even runs about 4.0 months. The median Hot Tub Installer earns $55,000/year, so Jobber's annual cost is roughly 1.5% of typical revenue — every year, forever.
That's $2,778 gone. And you don't own anything. Stop paying, lose access.
You're not the only one who's had enough.
Hot Tub Installers face unique challenges: Quoting a delivery before seeing the access path, then finding a 6-foot gate, a deck stair turn, or a hot tub that won't clear the side yard on install day. Coordinating the licensed electrician's 240V/50-amp GFCI hookup so the spa isn't sitting dry and unfilled while the customer waits days for power. Customers calling for warranty over cloudy water or a tripping breaker that's really chemistry or a bad GFCI, not the shell or pump they bought. Pad and base failures - a tub set on pavers that settle or a deck that wasn't rated for 4,000+ lbs filled, turning into a callback and a liability fight. On top of all that, Jobber charges $69/month ($828/year) — money that comes directly from your revenue. The median Hot Tub Installer earns $55,000/year. Software at $828/year is a meaningful percentage of that income, every year, forever. And you do not own anything.
Your Furniture dollies and appliance spider straps is yours. You bought it once. Nexa works the same way — $279 once for invoicing, scheduling, CRM, time tracking, and full accounting. All connected. All offline-capable. You own it like you own your tools.
Jobber is just one piece. What else are you losing money on?
Want this breakdown emailed to you?
Your exact Jobber cost, full stack total, and what switching saves. 10 seconds.
| Feature | Jobber | Nexa |
|---|---|---|
| Invoicing | ✓ | ✓ |
| Scheduling | ✗ | ✓ |
| CRM | ✗ | ✓ |
| Time Tracking | ✗ | ✓ |
| Full Accounting | ✗ | ✓ (SIMPL) |
| Task Management | ✗ | ✓ |
| Price | $69/mo forever | $279 once or 3 × $99 |
| 3-Year Cost | $2,778 | $279 |
| Stop paying? | Lose everything | Keep everything forever |
Most hot tub installers are fully switched before the weekend.
Go to Settings → Data Export. Download clients, jobs, and invoices as CSV.
15-minute setup. Import your client list and job categories.
Run both for 1-2 weeks to verify scheduled jobs transfer cleanly.
Cancel subscription before your next billing cycle. Download final export.
The day starts loading a 700-pound shell onto the trailer with the crew and double-checking the spider straps, because a dropped tub is a five-figure mistake. First stop is a delivery where the homeowner swore the gate was wide enough; it isn't, so we pull the fence section, walk the tub on its side down a board ramp, and set it on the cart for the turn around the AC condenser. Once it's on the pad we level it with shims, because a tub out of level stresses the shell and the jets pull air. We bond the cabinet, set the disconnect within sight of the spa, and wait on the electrician to land the 50-amp GFCI - that handoff is half the job's friction. Afternoon is a service call: a tub that won't heat. It's an airlock in the pump, cleared by cracking the union and bleeding it, plus a flow switch crusted with scale. We fill, prime, start the heater, and balance the water so the customer doesn't call back Saturday about foam. Last hour is invoicing the morning install, ordering a replacement cover lifter, and texting tomorrow's two customers to confirm gate access and that someone will be home for the walkthrough.
Real hot tub installers near you who run their business on Nexa — book directly, no platform fee. Are you a hot tub installer? Post your business and get found in your area — $2.99 one-time. Or browse every hot tub installer on Nexa →
For solo operators and small teams (1-5), yes. Nexa includes invoicing, scheduling, CRM, time tracking, task management, and full accounting. Jobber may be better if you have a large team (10+) or need enterprise-specific features.
It's $7.75/month over 3 years. Jobber is $69/month — that's $2,778 over 3 years. Which is more? And if you'd rather split it, Nexa is also available as 3 payments of $99.
Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.
30-day money-back guarantee. Full refund. If Nexa doesn't save you $500 in year one, you get every penny back.
Export your data from Jobber as CSV, import into Nexa in about 5 minutes.
The average solo operator there spends about $2,100/year on software — and Hot Tub Installer face their own version of that math. Rhode Island income tax up to 5.99%. Providence has no city income tax but property taxes are high. Rhode Island requires contractor registration through the CRB. Providence requires a business license. MA side of the metro has separate requirements.
Numbers reflect typical solo operators in the Providence metro. Your situation will vary.
Specific gaps Hot Tub Installers run into with Jobber, and what Nexa does instead.
$2,778 over 3 years. Or $279 once (or 3 × $99). Own your tools.
Get Nexa — $279 Once