You're Switching from Jobber.
Here's Why Excavation Contractors Choose Nexa.

Jobber
$69/mo
$828/year — every year, forever
Nexa
$279
Once. Own it forever.
or 3 payments of $99
Break even in 4.0 months. Then it's free forever.
"Switched from Jobber after the last price increase. Nexa does everything I needed for $279. Wish I'd done it sooner."
— Verified Excavation Contractor, former Jobber customer

The Bottom Line

Excavation Contractors on Jobber pay $69/month — $828/year. Over three years, that's $2,778. Nexa is $279 once. Break-even runs about 4.0 months. The median Excavation Contractor earns $55,000/year, so Jobber's annual cost is roughly 1.5% of typical revenue — every year, forever.

Key Numbers

$55,000
Median Excavation Contractor income
3%
Typical SaaS spend as % of revenue
4.0 mo
Break-even vs Jobber
$2,499
3-year savings switching to Nexa

What Jobber Is Costing You

The Damage

Jobber monthly $69/mo
Annual drain $828/yr
Year 2 (11.4% SaaS inflation) $922
Year 3 $1,028
3-year total $2,778

That's $2,778 gone. And you don't own anything. Stop paying, lose access.

Your Jobber subscription has cost you $0.00 since you opened this page.

Why Excavation Contractors Leave Jobber

✗Per-user pricing scales expensively ($29/user/month)
✗Marketing Suite is extra $79/month on lower tiers
✗Job costing only on Grow plan
✗Expense tracking locked to higher tiers
✗Real cost often $300-600/month for small teams
✗I recently canceled two subscriptions. HouseCall Pro is far superior. This company held me hostage for $8,250 for seven days claiming it was my first
✗Jobber is an overengineered platform that still lacks basic functionality. Confirmation emails cannot include a clear list of services being provided.
✗Their pricing could use some help. Features locked to higher tier should be included as default.
Excavation Contractors are leaving Jobber every week.

You're not the only one who's had enough.

Why This Matters for Excavation Contractors

We can't break ground until I confirm the 811 marks are still good and I've located the private lines the ticket doesn't cover - the propane run and the well line that aren't the utility's problem but become mine if I clip them. Today is a foundation dig and a sewer lateral. I set grade with the laser, start the excavator on the footprint, and immediately the bucket pulls up shale ledge that the soils report soft-pedaled - so now I'm hammering rock on a price I quoted for clay. The sewer trench goes past five feet, so the trench box goes in before anybody steps down to lay pipe; that's not optional, that's a life. By mid-day I'm balancing the math in my head: this cut is making more spoil than the site can use, so I'm scheduling trucks to haul off instead of stockpiling fill I won't need. Afternoon is fine-grading the building pad, compacting in lifts with the plate so the slab doesn't settle and crack, and proof-rolling. I shoot grades to make sure the pad drains away from where the house goes. Last hour is the part that decides if I made money: tallying truck loads, photographing the ledge for a change order, and writing up the rock and dewatering as extras. Then invoicing, scheduling tomorrow's tracks, and calling the customer about the change order before they see it on a bill.

Excavation Contractors face unique challenges: Hitting unmarked utilities despite an 811 ticket - a clipped gas line or fiber bundle is a shutdown, a fine, and a repair bill, and private lines past the meter aren't on the locate. Unknown soil and rock conditions on a fixed-price dig - quoting topsoil-and-clay and finding ledge rock or a high water table that needs a hammer, dewatering, and trucking that blows the bid. OSHA trench safety and cave-in liability - any trench over five feet needs a box or sloping, and skipping it to save time is the kind of shortcut that buries a worker. Spoil and import logistics - estimating cut-and-fill balance wrong leaves you either paying to haul off excess dirt or paying to import fill, with truck time eating the margin either way. On top of all that, Jobber charges $69/month ($828/year) — money that comes directly from your revenue. The median Excavation Contractor earns $55,000/year. Software at $828/year is a meaningful percentage of that income, every year, forever. And you do not own anything.

Your Excavator and a compact track loader is yours. You bought it once. Nexa works the same way — $279 once for invoicing, scheduling, CRM, time tracking, and full accounting. All connected. All offline-capable. You own it like you own your tools.

Your Full Stack Cost

Jobber is just one piece. What else are you losing money on?

Want this breakdown emailed to you?

Your exact Jobber cost, full stack total, and what switching saves. 10 seconds.

"I was paying Jobber $69/month and didn't question it until I did the math. $2,778 over 3 years for tools I don't even own. Nexa was $279. Once. Done."
— Excavation Contractor business owner

What You Get Instead

Feature Jobber Nexa
Invoicing ✓ ✓
Scheduling ✗ ✓
CRM ✗ ✓
Time Tracking ✗ ✓
Full Accounting ✗ ✓ (SIMPL)
Task Management ✗ ✓
Price $69/mo forever $279 once
or 3 × $99
3-Year Cost $2,778 $279
Stop paying? Lose everything Keep everything forever

Switching Takes 1-2 Days

Most excavation contractors are fully switched before the weekend.

1

Export your data

Go to Settings → Data Export. Download clients, jobs, and invoices as CSV.

2

Set up Nexa

15-minute setup. Import your client list and job categories.

3

Parallel run

Run both for 1-2 weeks to verify scheduled jobs transfer cleanly.

4

Cancel Jobber

Cancel subscription before your next billing cycle. Download final export.

✓ Run both in parallel. Cancel Jobber when you're confident. Zero risk.

What excavation contractors actually deal with

A day in the life of a excavation contractor

We can't break ground until I confirm the 811 marks are still good and I've located the private lines the ticket doesn't cover - the propane run and the well line that aren't the utility's problem but become mine if I clip them. Today is a foundation dig and a sewer lateral. I set grade with the laser, start the excavator on the footprint, and immediately the bucket pulls up shale ledge that the soils report soft-pedaled - so now I'm hammering rock on a price I quoted for clay. The sewer trench goes past five feet, so the trench box goes in before anybody steps down to lay pipe; that's not optional, that's a life. By mid-day I'm balancing the math in my head: this cut is making more spoil than the site can use, so I'm scheduling trucks to haul off instead of stockpiling fill I won't need. Afternoon is fine-grading the building pad, compacting in lifts with the plate so the slab doesn't settle and crack, and proof-rolling. I shoot grades to make sure the pad drains away from where the house goes. Last hour is the part that decides if I made money: tallying truck loads, photographing the ledge for a change order, and writing up the rock and dewatering as extras. Then invoicing, scheduling tomorrow's tracks, and calling the customer about the change order before they see it on a bill.

The tools a working excavation contractor actually owns

Local excavation contractors on Nexa

Real excavation contractors near you who run their business on Nexa — book directly, no platform fee. Are you an excavation contractor? Post your business and get found in your area — $2.99 one-time. Or browse every excavation contractor on Nexa →

FAQ

Is Nexa really a Jobber replacement for excavation contractors?

For solo operators and small teams (1-5), yes. Nexa includes invoicing, scheduling, CRM, time tracking, task management, and full accounting. Jobber may be better if you have a large team (10+) or need enterprise-specific features.

$279 seems like a lot.

It's $7.75/month over 3 years. Jobber is $69/month — that's $2,778 over 3 years. Which is more? And if you'd rather split it, Nexa is also available as 3 payments of $99.

Can I pay in installments?

Yes. Nexa is $279 as a one-time payment, or 3 payments of $99 ($297 total). Either way it's a one-time purchase — no subscription, no recurring fees ever.

What if I don't like it?

30-day money-back guarantee. Full refund. If Nexa doesn't save you $500 in year one, you get every penny back.

Can I import my Jobber data?

Export your data from Jobber as CSV, import into Nexa in about 5 minutes.

Excavation Contractors in Oklahoma City

The average solo operator there spends about $1,700/year on software — and Excavation Contractor face their own version of that math. Oklahoma income tax up to 4.75%. OKC has no city income tax. Overall tax burden is below national average. Oklahoma requires contractor licensing through the CIB for projects over $50,000. OKC requires a general business license.

Numbers reflect typical solo operators in the Oklahoma City metro. Your situation will vary.

If You Need These — Nexa Has Them

Specific gaps Excavation Contractors run into with Jobber, and what Nexa does instead.

✗
Jobber gapPer-user fees add up quickly
✓
Nexa$279 once for your whole business — no per-user fees, ever.
✗
Jobber gapBasic plan missing key features
✓
NexaEverything in $279 — no tiers, no locked features.
✗
Jobber gapNo permit tracking or compliance docs
✓
NexaDocument attachment, permit tracking, customer notes.
"Jobber raised prices again and I was done. Found Nexa — $279 once. I own it. No more 'we're updating our pricing' emails. Best business decision this year."
— Excavation Contractor, switched from Jobber

Stop Losing $828/Year to Jobber

$2,778 over 3 years. Or $279 once (or 3 × $99). Own your tools.

Get Nexa — $279 Once
or 3 payments of $99
✓ 30-day money-back guarantee — save $500 or full refund

Still want Jobber?

We think Nexa is the better deal at $279 once vs $69/mo. But if you've decided on Jobber, here's the link. No hard feelings.

Jobber — $69/mo →

This is an affiliate link. If you sign up, we earn a commission.

Also Compare